Defender 90 Front Door Screws Needed!

JJbing · Nov 23, 2012

Hi guys as some of you know i drive a defender 90 1995 300tdi.
I recently had the seals around my doors replaced and some of the screws which attach the door card to the door have either seized or threaded. However i cannot find any where to get these screws from only a full set including a door. Can anyone help?
I also need a hinge for a door as it has dropped.
Many thanks!

JJbing · Nov 23, 2012

Bump!

Pikey · Nov 23, 2012

FFS get some self tapping screws. as for the hginge. Ebay for the fooker!!

JJbing · Nov 23, 2012

What size though?

Pikey · Nov 23, 2012

JJbing said:
What size though?

one's that'll fit stick a drill bit in the hole if it fits that's the size you need.

Jeesus can you not think of anything without someone holding ya hand :Confused:

JJbing · Nov 23, 2012

redhand said:
one's that'll fit stick a drill bit in the hole if it fits that's the size you need.

Jeesus can you not think of anything without someone holding ya hand :Confused:

Yes i can, would just like to confirm i am getting the correct things.
I obviously don't have the experience that you have as i am young...

Pikey · Nov 23, 2012

well why the fook doin't ya say so..

JJbing · Nov 23, 2012

i think it was obvious. the hint by my name says "junior member"

SCOTSMAN · Nov 23, 2012

You are only a junior member because you have 26 posts :doh:

JJbing · Nov 23, 2012

im a junior in general and new to land rovers ! duh!

Oldseadog · Nov 23, 2012

Well then, Junior General,

All you have to do is tootle off to your local Motorists Do-It-Yourself store and pick up a packet of small self-tapping screws, (black is usually quite a good colour for them), go to the pay desk and give them enough money in exchange for them.

When you get home, ask daddy if he will show you how to use a crosshead screwdriver to insert each of the little screwy things into the waiting orifii (that's plural for orifice, in case you didn't know), whilst rotating them in a clockwise direction. You can turn them as often as you like until they don't want to turn any more. That generally means that they are tight enough.

As for the hinge ... Don't be so FN idle and check on fleabay!!

Defender 90 Front Door Screws Needed!

JJbing

New Member

JJbing

New Member

Pikey

Dummy Ejection Facilitator..

JJbing

New Member

Pikey

Dummy Ejection Facilitator..

JJbing

New Member

Pikey

Dummy Ejection Facilitator..

JJbing

New Member

SCOTSMAN

Well-Known Member

JJbing

New Member

Oldseadog

Well-Known Member

Similar threads