defender 3 door

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

motormender

New Member
Posts
6
Location
birmingham
Hi all been on along time don't ask very often. But is there a differance? between the 110 and the defender 110 ak 1985 1990 chasey?as when i order parts for mine that are never right. IF i put my reg into flebay mine comes back as a left hand drive petrol so don't know it belonged to alectric company so at a loss.MY spelling bad sos
 
Chassis wise no only fittings for left hand drive or right and bulkhead. The same matters for the metal only later models. A 1989-92 were 200tdi defender 93 onwards 300tdi until Td5 introduced. 1983 onwards 110 was based on the later version of series 3 various engines 2.25 2.5 V8 petrol and diesel plodders 2.25 2.5td. lefthand drive utility or overseas market
 
thank you it was a 19 j but now a disco 200 tdi just can't seem to get the right parts unless i take them of and take with me to get new. sorry for spelling again . car is a pain for parts. THANKS AGAIN
 
Try taking a photo of what part you need and post it on here.
What you have is a "bitsa" - bits of this bits of that - just like mine.
Using your reg is no use!
 
Not sure putting the chassis number into eBay is the best bet to be honest. Try your local Indy Land Rover parts specialist or one of the usual specialists from the Landy magazines.
 
You must log in or register to reply here.

Similar threads

A
Defender 90 XS TD
Replies
5
Views
3K
lightning
lightning
dconnrt
80's 110 - Braking pulling to the right in wet conditions
Replies
5
Views
553
dconnrt
dconnrt
Rubberknees
P38 rear door window trims replacement
Replies
14
Views
1K
Rubberknees
Rubberknees
G
Newbie - Newly Wed - Defender 110 TD5 CSW
Replies
11
Views
997
WhiskyLassie
WhiskyLassie
ryan_1993
Understanding a few 1990s Land Rover Trim/Options for the CSW (Research)
Replies
11
Views
2K
Stevetheplant
S
Back
Top