dave, the return! pic heavy bulhead repairs

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Nice job I have a replacement Bulkhead to weld up for my rebuild. not quite as bad as that. But a bit fiddly as the inner J profile on the vent openings have rotted in places. I'll refer to this thread when I'm sat thinking "why the Fook am I doing this" :eek:
 
Pikey said:
Nice job I have a replacement Bulkhead to weld up for my rebuild. not quite as bad as that. But a bit fiddly as the inner J profile on the vent openings have rotted in places. I'll refer to this thread when I'm sat thinking "why the Fook am I doing this" :eek:
Click to expand...

the vent profiles were a pain in the arse!, there's about a 50 gram pack o baccy gone into that while sat thinking "wat the fook do I do with this?" :eek:

anyway, few more pics of the offside, a quick pic of rob's rust bucket, and a bonus pic of a pink pig :rolleyes:

best o luck wi yours pikey ;)

















 
nice job
i'll tell my bother to have a look at this thread so he can see what hes in for , he's doing his soon :D
 
Iann said:
nice job
i'll tell my bother to have a look at this thread so he can see what hes in for , he's doing his soon :D
Click to expand...

its been in the workshop about 4 weeks, the night it came in it got needle gunned to find the extent of rot. initially we thought it might be a replacement bulkhead job, but decided there was enough reasonable stuff to try and repair it.
repairs started last Thursday on the motor, (panels prefab'd earlier, but all home made), but as its a spare time job, its been hit and miss over 4 days. (nowt done on it yesterday, got told I had to go out for me birthday :D )
 
Faaaantastic thread! Just about to do this although I opted for YRM panels instead of making my own.

From what you done I presume they have to be fully welded and I can't get away with plug welds? Did the welds not show through after painting or did you use filler?

Started a thread earlier but think this answers all my questions :)

This is what I'm facing
 

Attachments

  • image.jpg
    image.jpg
    351.6 KB · Views: 230
Auldgreen90 said:
Faaaantastic thread! Just about to do this although I opted for YRM panels instead of making my own.

From what you done I presume they have to be fully welded and I can't get away with plug welds? Did the welds not show through after painting or did you use filler?

Started a thread earlier but think this answers all my questions :)

This is what I'm facing
Click to expand...

I considered yrm panels, but never got further than that. really must sample their stuff sometime.

welding wise, pretty much anywhere I could get a weld, I did. all new panels are seem welded, the only plug welding was building up the profile of the vent aperture.

once you get the outer skin off, your gonna be faced with a whole load of awkward reinforcing panels internally, and its these that'll cause your headache as there likely to be rusted thru or non existant!

no filler used, the surface welds have been ground flush, and the finish is just methylene blue to highlight any imperfections and offer a bit of protection prior to painting. (of which I'm not doing, as I don't do cosmetic paint, and sarah (who dave belongs to) wants to do it herself)

there's some more pictures to come, just aint got round to uploading them to photobucket yet.

best of luck with yours!

edit-
re yrm panels, all mine are fabricated from 16guage (1.6mm) which I *think* are slightly thicker than yrm's.
 
Thanks for the thread Neil!
Popped over yesterday but there was no one in- should have phoned but Ill try again this week! Cant wait to see dave , youre doing a fantastic job :D
 
You must log in or register to reply here.

Similar threads

J
300 Tdi Engine back in, nearly - Story and at the end Questions
Replies
0
Views
709
jer_300Tdi_90
J
M
My 1989 90 V8 County
Replies
6
Views
2K
MattYorke
M
Jon308
6x6 Range rover/double cab defender build
Replies
3
Views
2K
hef19898
hef19898
BoabCarney
D1 300tdi My first landy
2 3 4
Replies
75
Views
10K
chromiumuk
chromiumuk
jbenekeorr
My Discovery 1 Progress
2
Replies
34
Views
8K
John Saunders
John Saunders
Back
Top