D2 with ACE. Noise on start up.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Saltire Sam

New Member
Posts
6
Location
Scotland
Hi, I just bought a D2 to use as a tow vehicle while I finish a D90 rebuild. Initial jobs were replacing a leaking steering pump and a rear exhaust. It’s had a rear spring conversion and new shocks all round fairly recently
by the looks of it. On start up I get 4 to 6 sharp on/off clunking sounds from under the vehicle. Sounds central to rear. Any ideas to a cause? Initial thoughts were perhaps ACE system related. Cheers.
 
Could it be the exhaust hitting the chassis or gearbox?

Hi Steve and thanks for your suggestion. No, its not the exhaust. Its a definite on / off sound. Just wondering if its something to do with the Wabco ACE pump initialising on start up, or not, as the case may be.
 
My ace was deleted before I bought it, so unsure if they're supposed to make any noise. You could listen or touch the valve block on the offside chassis under the drivers door area (where the 8 pipes go into) when you start it up. Can't think of anything else it could be.
Only other thing is the compressor on the nearside chassis behind the plastic cover, whether it's been turned off if it's been converted to coils
 
Only other thing is the compressor on the nearside chassis behind the plastic cover, whether it's been turned off if it's been converted to coils
I'll second that, I moved the height sensor on mine last week to fix the shock mount and since then the compressor has been sporadicly firing up....
It's can't be anything with the ace as that's a belt driven assistance pump same as a regular power steering pump :)
 
Back
Top