D2 part no. required

Andy Warren · Mar 19, 2021

Hi all, does anyone know the p/no of the plastic scrivet that holds the w/arch liners in please?
I've looked through the parts list & I can't find it

. Also does anyone know where I can source the plastic 'locknut' as LR call it p/no AWR5619 that takes a self tapping screw to hold the wind deflector or plastic shield under the radiator ? As LR in their infinite wisdom have discontinued it

or any fittings that will make a good substitute.
Many thanks.

Hellastony · Mar 19, 2021

Andy,
In answer to your first question, I think these are what you want, MXC3119
https://www.vehicleclips.co.uk/8mm-...rover-discovery-2-wheel-arch-linings-mxc3119/
or
https://www.devon4x4.com/mxc3119-rivet-352412.html

As regards your second question, if you mean what I think you mean, just use a plastic rawplug (there are other makes!!) instead, and just put the self tapper into that.

marjon · Mar 19, 2021

These?

https://www.jgs4x4.co.uk/plastic-wheel-arch-clip/

J

Andy Warren · Mar 19, 2021

Hellastony said:
Andy,
In answer to your first question, I think these are what you want, MXC3119
https://www.vehicleclips.co.uk/8mm-...rover-discovery-2-wheel-arch-linings-mxc3119/
or
https://www.devon4x4.com/mxc3119-rivet-352412.html

As regards your second question, if you mean what I think you mean, just use a plastic rawplug (there are other makes!!) instead, and just put the self tapper into that.

Many thanks for that I'll get some ordered. I was thinking of rawlplugs but thought they might just spin in the hole, all the same I'll give it a whirl

.

Andy Warren · Mar 19, 2021

marjon said:
These?

https://www.jgs4x4.co.uk/plastic-wheel-arch-clip/

J

They're the ones that hold the arch liners in on the my Freelander 1 & as I keep a stock of those I'll see if they fit, good shout. The p/no Hellastony gave me MXC3119 are the ones that came out. Many thanks.

Stanleysteamer · Mar 19, 2021

Andy Warren said:
Many thanks for that I'll get some ordered. I was thinking of rawlplugs but thought they might just spin in the hole, all the same I'll give it a whirl.

I got a massive bag from the website "Wish" that contains fixings of all sorts, cost very little. sort you need to fix door cards, etc etc.
You might want to have a look at em.

Andy Warren · Mar 19, 2021

Stanleysteamer said:
I got a massive bag from the website "Wish" that contains fixings of all sorts, cost very little. sort you need to fix door cards, etc etc.
You might want to have a look at em.

Hi Stan, I have got a few door card & tailgate card fixings that I could have a look at drilling a 1/8th hole in the centre of & as long as they fit in the hole I'll be sorted (I'll post pics if successful) so whilst I fit my new fr. calipers tomorrow I'll have a bash, mind you I've got me china virus jab in the morning so we'll see how that goes!

Andy Warren · Mar 21, 2021

Hi all, I can confirm the scrivets (see pic) fit the plastic shield under the radiator, the rawlplugs I had to hand just spun (the holes are 8mm). It's a shame you can't get the proper part as it would match the s/steel fittings I've already done.

D2 part no. required

Andy Warren

Well-Known Member

Hellastony

Active Member

marjon

Well-Known Member

Andy Warren

Well-Known Member

Andy Warren

Well-Known Member

Stanleysteamer

Well-Known Member

Andy Warren

Well-Known Member

Andy Warren

Well-Known Member

Attachments

Similar threads