The shaft for the aircon compressor is not being turned by the pulley when the engine is running. The system has gas. There are 14.7 volts at the plug for the aircon clutch socket & there is a good ground connection. The clutch coil is 4 ohms. Is this normal? If so the electrics would appear to be ok & the problem is mechanical. If so how do I replace the worn clutch components?
D2 AIRCON u/s
- Thread starter Equinut
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discool
Well-Known Member
- Posts
- 13,609
Simple question thats been asked before, link below and there’s a post to the part … or similar u require, so just undo a bolt and an electrical connection and maybe a clip or two 15 minutes and the jobs done simples.
Disco 2 - Aircon compressor parts
MIne has self destructed in the clutch area. What does it consist of please? Mine had fallen off and jammed my steering column
www.landyzone.co.uk
Thanks to Google.
Last edited:
Similar threads
