D2 AIRCON u/s

Equinut · Tuesday at 19:55

The shaft for the aircon compressor is not being turned by the pulley when the engine is running. The system has gas. There are 14.7 volts at the plug for the aircon clutch socket & there is a good ground connection. The clutch coil is 4 ohms. Is this normal? If so the electrics would appear to be ok & the problem is mechanical. If so how do I replace the worn clutch components?

discool · Tuesday at 20:16

Equinut said:
The shaft for the aircon compressor is not being turned by the pulley when the engine is running. The system has gas. There are 14.7 volts at the plug for the aircon clutch socket & there is a good ground connection. The clutch coil is 4 ohms. Is this normal? If so the electrics would appear to be ok & the problem is mechanical. If so how do I replace the worn clutch components?

Simple question thats been asked before, link below and there’s a post to the part … or similar u require, so just undo a bolt and an electrical connection and maybe a clip or two 15 minutes and the jobs done simples.

Disco 2 - Aircon compressor parts

MIne has self destructed in the clutch area. What does it consist of please? Mine had fallen off and jammed my steering column

www.landyzone.co.uk

Thanks to Google.

MJI · 2024-07-31T15:44:07+0100

Literally just a plate, washer, and bolt

Equinut · 2024-07-31T16:29:16+0100

Thanks - presumably a dedicated part or could something similar be used?

Equinut · 2024-07-31T16:32:48+0100

Suggestions for sourcing please - apart from Chinese clutches & a complete used compressor google has not been very helpful.

MJI · 2024-07-31T17:03:29+0100

scrap yard, most Denso should be OK

Equinut · 2024-07-31T17:12:17+0100

MJI said:
scrap yard, most Denso should be OK

Thanks, I'll try that.

D2 AIRCON u/s

Equinut

Member

discool

Well-Known Member

Disco 2 - Aircon compressor parts

MJI

Well-Known Member

Equinut

Member

Equinut

Member

MJI

Well-Known Member

Equinut

Member

Similar threads