Rpats
New Member
- Posts
- 15
- Location
- Skelmersdale
Hi has anyone any tips on splitting the cv joint from the drive shaft on a 1993 discovery 1, I have wrecked the spline have new parts just can't split it to put new bit on cheers in advance
Cv joint discovery 1
- Thread starter Rpats
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
whack it off with a copper hammer or use a wood block and normal hammer, you will need to stand cv on end and push snap ring in with screw driver as you tap new shaft in
Rpats
New Member
- Posts
- 15
- Location
- Skelmersdale
Cheers ill try this tonight, have up last night as I didn't wana snap anythin lol
Paulmitchell1984
Well-Known Member
- Posts
- 1,819
- Location
- Leeds
make sure cir clip is removed then tap off usually easy to come off.
Rpats
New Member
- Posts
- 15
- Location
- Skelmersdale
No joy fellas, I feel like I'm gona brake it?
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
it can take quite a whack to get them apart ,but it will
Paulmitchell1984
Well-Known Member
- Posts
- 1,819
- Location
- Leeds
u definately removed the little round clip? im sure thers one (while since i did mine) but came out with a swift whack...or two
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
you cant remove clip until they are seperated
Paulmitchell1984
Well-Known Member
- Posts
- 1,819
- Location
- Leeds
Rpats
New Member
- Posts
- 15
- Location
- Skelmersdale
Try again over the weekend lol, Wots the best oil to put back in the housing? Thanks gor tge help btw
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
one shot grease (stc3435) or ep90
Paulmitchell1984
Well-Known Member
- Posts
- 1,819
- Location
- Leeds
as above one shot greese (sh!tpart do one thats measured to right amount), you can use oil but if globes are abit naff then theres more oil on drive than in em 
Rpats
New Member
- Posts
- 15
- Location
- Skelmersdale
Cheers for all the advice guys :bounce::bounce:
