Cut out wont start

Looking for some advice, disco 2 td5, cut out whilst driving, won't start.
Feels like fuel starvation.

When I try and start it, if i take my foot off the throttle, 1 cylinder fires up for about 7/8 seconds then it dies. Rev guage moves slightly when turning over.

Replaced the fuel pump, fuel filter, injector seals and injector harness loom.
And it is exactly the same.


Any advice or suggestions appreciated

What year is it? 10P/15P?
Assume you have done the fuel purge? How about air bleed valve?
Also you shouldn't be using any throttle to start it

If you post here also then more knowledgable people than me will be along I expect
https://landyzone.co.uk/forum/introduce-yourself.20/

Kev12 said:

What year is it? 10P/15P?
Assume you have done the fuel purge? How about air bleed valve?
Also you shouldn't be using any throttle to start it

If you post here also then more knowledgable people than me will be along I expect
https://landyzone.co.uk/forum/introduce-yourself.20/

Click to expand...

Cheers for your reply, its 16p or basically 15p 2001. Yeah the fuel system is fully purged several times.
I wouldn't normally use throttle to start but obvioisly having starting problems I have been trying everything.
When you say air bleed valve, is that the non return valve on the fuel filter housing? That part has just arrived and I will be fitting that tomorrow