Glyn D
Active Member
- Posts
- 134
- Location
- North wales
Owing to the fact that so many of these Landys get stolen, much of my time of late has been invested in improving the security of my beloved.
I'm very much a believer in custom security because it should, in theory, slow down the scrotes even more. I like the idea of filling the car up with a plume of smoke. It prevents the thieves from being able to see what they are doing and draws attention to the vehicle.
Yesterday I took the kids up into the woods and we detonated some smoke grenades.
Unfortunately my battery died just after taking this photo so I wasn't able to get any more.
I attached a central locking solenoid/actuator to the ring pulls of the grenades. Hook this up to a battery and boom!
Or at least that's what was supposed to happen. What I found was that the actuator would pull the ring out as far as it could, I'd then reposition the actuator, try again and it would pull it even further. I kept repeating this until the ring pulls had completely disconnected but the grenades didn't go off.
I decided to open up the grenade and found that they just had a standard fuse. You need to give the rings a good, hard and long tug and this creates a spark which in turn ignites a fuse.
The kids and I had some fun letting the grenades off anyway but this morning it was back to the drawing board.
I've ditched the actuator idea and this morning have ordered some of these fuse igniters:
Once I have the ignition system sorted I'll then look at programming the electronic control unit and think about adding some pepper spray into the mix too. Will update this thread as things progress.
I'm very much a believer in custom security because it should, in theory, slow down the scrotes even more. I like the idea of filling the car up with a plume of smoke. It prevents the thieves from being able to see what they are doing and draws attention to the vehicle.
Yesterday I took the kids up into the woods and we detonated some smoke grenades.
Unfortunately my battery died just after taking this photo so I wasn't able to get any more.
I attached a central locking solenoid/actuator to the ring pulls of the grenades. Hook this up to a battery and boom!
Or at least that's what was supposed to happen. What I found was that the actuator would pull the ring out as far as it could, I'd then reposition the actuator, try again and it would pull it even further. I kept repeating this until the ring pulls had completely disconnected but the grenades didn't go off.
I decided to open up the grenade and found that they just had a standard fuse. You need to give the rings a good, hard and long tug and this creates a spark which in turn ignites a fuse.
The kids and I had some fun letting the grenades off anyway but this morning it was back to the drawing board.
I've ditched the actuator idea and this morning have ordered some of these fuse igniters:
Once I have the ignition system sorted I'll then look at programming the electronic control unit and think about adding some pepper spray into the mix too. Will update this thread as things progress.
Attachments
Last edited: