Larry365
Active Member
- Posts
- 558
- Location
- Lincolnshire, UK
Evening folks.
While you lot have been enjoying beers & BBQs on this exceptional winters day, I was deceptively invited over to my parents house for a meal. Of course there was a hidden agenda. Me old man has a TD5 Disco and needed my expertise in diagnosing a recent banging noise. Naturally my expertise goes as far as kicking the tyres so I thought I'd ask around to see if anyone has any ideas.
Basically the loud bang is coming from what I can tell to be the front drivers side corner and happens when hitting speed bumps, "level" crossings and such surfaces. It seems to only happen when the tyre hits the bump straight on and has never happened when mounting curbs at an angle. A minimum speed of about 15mph is needed for this to happen.
The bang sounds like what i could only describe as two (very) large hammers smashing together. Its a very "dead" sound, as in a CLONK with no follow up noise if you get my drift.
The entire front suspension has been checked by a garage. I have checked for play in the propshafts, wheel hubs and basically anything that moves under the vehicle. Everything seems fine.
To me it sounds like it could be something like the radius arm being pushed back but there is no sign of bush wear. Or shafts being pushed back into boxes.
Its a hard one to describe so if anyone has any questions to further understand what the F*** i am on about, let me know!
I will do my best to get a good audio recording of the issues ASAP.
Thanks in advance.
While you lot have been enjoying beers & BBQs on this exceptional winters day, I was deceptively invited over to my parents house for a meal. Of course there was a hidden agenda. Me old man has a TD5 Disco and needed my expertise in diagnosing a recent banging noise. Naturally my expertise goes as far as kicking the tyres so I thought I'd ask around to see if anyone has any ideas.
Basically the loud bang is coming from what I can tell to be the front drivers side corner and happens when hitting speed bumps, "level" crossings and such surfaces. It seems to only happen when the tyre hits the bump straight on and has never happened when mounting curbs at an angle. A minimum speed of about 15mph is needed for this to happen.
The bang sounds like what i could only describe as two (very) large hammers smashing together. Its a very "dead" sound, as in a CLONK with no follow up noise if you get my drift.
The entire front suspension has been checked by a garage. I have checked for play in the propshafts, wheel hubs and basically anything that moves under the vehicle. Everything seems fine.
To me it sounds like it could be something like the radius arm being pushed back but there is no sign of bush wear. Or shafts being pushed back into boxes.
Its a hard one to describe so if anyone has any questions to further understand what the F*** i am on about, let me know!
I will do my best to get a good audio recording of the issues ASAP.
Thanks in advance.