Couple of scratchy head problems

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
J

Junder

New Member
Posts
122
Location
Belfast, Northern Ireland, United Kingdom
Last week my oil light was flicking on and of so decided I should do a full oil change and filter change seemed to sort things until today when the oil light started flicking on and off again, checked oil levels and they are fine, what else would make the oil light come on.

Also there is a strange clanking noise coming from the drivers side, front wheel. Have had two garages look for the origin of the noise, including a land rover specialist both of whom can't find the noise. The bushes are fine, springs fine, break pad secure. The noise is a metal on metal irregular clanking which would make you think break pad or disk but as I said both are secure. Was wondering if anybody else had come across the problem before and gave a solution.
 
Junder said:
Last week my oil light was flicking on and of so decided I should do a full oil change and filter change seemed to sort things until today when the oil light started flicking on and off again, checked oil levels and they are fine, what else would make the oil light come on.
Click to expand...

www.discovery2.co.uk / TD5 "Famous" Oil Pump Bolt

Also there is a strange clanking noise coming from the drivers side, front wheel. Have had two garages look for the origin of the noise, including a land rover specialist both of whom can't find the noise. The bushes are fine, springs fine, break pad secure. The noise is a metal on metal irregular clanking which would make you think break pad or disk but as I said both are secure. Was wondering if anybody else had come across the problem before and gave a solution.
Click to expand...

dust shield loose behind brake disc
 
The land rover specialists had the car on the ramps, had the wheel of, took it for several spins and were still none the wiser. Said he would have to strip the wheel down to track it, only thing he could think of was the cv joint, any guides on that?
 
As said before, change your oil pressure switch and hope that's the problem, if not you have a blockage/pump problem.
But do it soon!!
 
Oil pressure light on usually means low oil pressure...That`s what it`s there for! It could be a faulty switch, as said, 5 minutes and coupla quid to replace... low oil pressure will result in major bills if not addressed quickly. Seems to me unlikely to be missing bolt as this would result in total pump failure, not just low pressure. Oil thins out with temperature, resulting in less pressure, this is normal, but NOT to the extent of warning coming on.
If in doubt get it looked at. Don`t run at low oil pressure. Engines are more expensive than 1/2 hour labour in a garage.
 
You must log in or register to reply here.

Similar threads

L
FLICKERING BRAKE PAD WARNING LIGHT WHEN HANDBRAKE APPLIED??
Replies
11
Views
638
lrjohn
L
S
Series 3 Loud knocking sound from the engine when running.
Replies
12
Views
393
steve2286w
steve2286w
ar1g3
P38A P38 rattle at idle
2
Replies
26
Views
3K
roythebus
R
JockHiltz
Vibrating while accelerating
Replies
5
Views
948
tottot
tottot
JockHiltz
Vibration when accelerating
Replies
2
Views
675
miktdish
miktdish
Back
Top