roger68
Member
- Posts
- 34
- Location
- Keighley West Yorkshire
Hi all 2001 p38 diesel just looked at coolant sensors ive go a blue brown and black one I know what the last two do but should it have a green one for the ecu instead of a blue one thanks
Coolant sensors
- Thread starter roger68
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
First one on head near injection pump should be blue two wire or in some cases brown one wire dash gauge sensor. Next one should be Green two wire engine ECU sensor. Last one nearest bulkhead should be black two wire Aircon fan sensor. If you have a blue or brown sensor where green one should be you will be having problems.
roger68
Member
- Posts
- 34
- Location
- Keighley West Yorkshire
just looked has got green one in middle think it might be goosed had it on diagnostics showed 44 c when engine is cold
- Posts
- 58,170
- Location
- Preston Lancs.
Default used by ECU if sensor is knackered is supposed to be 50 c so it's not a long way from that. Try it first thing in morning before start up should be around same as temp on Hevac unit.
Gazza36
Active Member
- Posts
- 250
- Location
- South West
If diagnostics showed a decrease in voltage as the temperature increased does that mean the sensor is ok?
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
Maybe, maybe not, depends on the actual resistance change relative to temperature.
Gazza36
Active Member
- Posts
- 250
- Location
- South West
As the temperature increased, there was a drop in the field showing temperature (v), also the fuel level and accelerator pedal were all over the place, it was a snapon machine.
- Posts
- 58,170
- Location
- Preston Lancs.
Proper diag may help.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
I think there was a member in St. Austell who was planning on buying a Nanocom. Cannot remember his name though.
