Series 3 Contaminated brake shoes

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
8

88SWaB

Member
Posts
32
Location
Nottingham
I had a leaking wheel cylinder which is now sorted but the brake linings have been contaminated with brake fluid. Everything is now clean and I have roughed up the linings which now 'appear' to be free from the fluid. My question is - should I replace the brake shoes?
 
Best practice would be new they are not dear, but if needs must slam the cleaned old ones back on.
If standard 10 inch sls shoes, the cheap birtpart ones are actually okay.
 
88SWaB said:
Hi Lynall. I think you are right about new shoes and it makes sense to change them. Thanks for the reply.
Click to expand...

Thing is with the series motors, it is always worth keeping spares of pretty much everything, so when you buy gaskefs for pennies, buy a few more as you are guaranted to use them at some time, same as wheel bearings/seals etc, it's bloody annoyng when a few pence part stops you finishing the job in hand.
 
88SWaB said:
I had a leaking wheel cylinder which is now sorted but the brake linings have been contaminated with brake fluid. Everything is now clean and I have roughed up the linings which now 'appear' to be free from the fluid. My question is - should I replace the brake shoes?
Click to expand...
You can wash them with TFR or Gunk and put them back in, but they are so cheap it is probably just as easy to get new ones.
 
lynall said:
Thing is with the series motors, it is always worth keeping spares of pretty much everything, so when you buy gaskefs for pennies, buy a few more as you are guaranted to use them at some time, same as wheel bearings/seals etc, it's bloody annoyng when a few pence part stops you finishing the job in hand.
Click to expand...
Saves on postage as well, especially if you can scrape over the free delivery minimum order at the suppliers.
 
I agree about the spares and saving on postage where possible which is why I had a seal kit to sort out the leaky cylinder. I also thought I had replacement brake shoes as a friend of mine gave me several sets after he sold his Landy. When I checked them this morning I found one set is for the hand brake and the other two are for 11inch brakes. I have now ordered a new set of shoes.

Thanks for all the replies, it is appreciated.
 
You must log in or register to reply here.

Similar threads

S
brake spring
Replies
2
Views
556
Bobsticle
Bobsticle
L
Disco 2 brake question
Replies
5
Views
627
landynutterme
L
C
Help with brakes
Replies
8
Views
787
c0w3h
C
dag019
Brake caliper rebuild
Replies
3
Views
831
Seaswood
Seaswood
S
fitting transmission brake
Replies
4
Views
617
tottot
tottot
Back
Top