con rod bearings

Hey guys, Been a while but crappy work gets in the way of having fun with the range rover! Never work for yourself!!!!!!!!
Can anyone help me out with the torque settings for the con rod bolts? cant find it in rave anywhere! Its a 2002 V8 Thor.

BTW BIG BIG shout out to Datatek............ Purchased the eas lead from him and he is a gent to deal with and top man!

Datatek......sorry i didnt email you back.... i will soon and carry on the convo.

Thanks in advance guys

Rob

Stage 1 20nm
Stage 2 further 80 degrees

Cheers dude your a gent! Gaugeing eighty degrees should be fun though! Have to think of a way of doing that...................

rangerob said:

Cheers dude your a gent! Gaugeing eighty degrees should be fun though! Have to think of a way of doing that...................

Click to expand...

If they are hexigon bolts each flat point to point is 60 degrees. So after initial torque mark up and turn one and one third flats. If they are 12 point bolts every point is 30 degrees from the next one. Or.

1/2 Inch Drive Torque Wrench - Torque Angle Gauge Mechanics Dial Tool Kit 2100 | eBay

The ORACLE has come up with the solution! Cheers mate that makes it very easy then. I will make two marks.......... one static and one on the 12 point bolt and work it out from there. Might see if halfrauds have a dial gauge first thing and if not go with what I said previous,

Cheers Rob.