complete newbie and nervous!
- Thread starter seawych
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Hello and Welcome,
So, do not leave us in suspense....what did you buy?????
Cheers
So, do not leave us in suspense....what did you buy?????
Cheers
greyhair
Well-Known Member
- Posts
- 1,303
- Location
- IN MY SHED
Welcome
and you are not the first
i jumped straight in first one i spotted, ignored all the advise i was given
and you are not the first
i jumped straight in first one i spotted, ignored all the advise i was given
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Piccies, we want piccies......
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Looks nice and clean.
Someone appears to have shown some love and attention on it.
What engine do you have under the bonnet?
Cheers
Someone appears to have shown some love and attention on it.
What engine do you have under the bonnet?
Cheers
We are having the springs changed back to normal and a silencer put back on as it sounds like a tank. it needs a new drivers door as the top frame below the window has split. Any ideas on best way forward with that? on the inside of the back door is a hole,any idea what should be there? sorry for all questions it is all so new and strange!
LincolnSteve
Well-Known Member
- Posts
- 1,204
- Location
- Lincoln
I got carried away and bought my land rover impulsively but from looking at that photo you have done far better than I did.
Congratulations and welcome.
Remember bits will drop off but they can always be stuck back on and there are more than enough people on here to tell you how to do it.
Congratulations and welcome.
Remember bits will drop off but they can always be stuck back on and there are more than enough people on here to tell you how to do it.
Looks OK, will look better on normal springs. Try Paddock's or Craddock's web sites for starters for door tops, they're not expensive and it's an easy job. Remember to get all the bits (rubber seal etc.). It will come just painted with undercoat, you'll have to arrange to paint it in the matching colour. I bought mine on impulse after seeing it for sale standing on the roadside. Enjoy.
.
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
They ain't 2 piece doors, they are 1 piece push button.Looks OK, will look better on normal springs. Try Paddock's or Craddock's web sites for starters for door tops, they're not expensive and it's an easy job. Remember to get all the bits (rubber seal etc.). It will come just painted with undercoat, you'll have to arrange to paint it in the matching colour. I bought mine on impulse after seeing it for sale standing on the roadside. Enjoy
Whole new door if you can't weld.
Hole in rear door? Just below the glass? Rear wiper.
In the middle ish? Spare wheel carrier?
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Welcome to the forum, see if any of the holes are in a similar place to anything on my back door.
If you haven't already looked into it consider beefing up the security before you find a gap in your drive where your pride and joy used to be.
If you haven't already looked into it consider beefing up the security before you find a gap in your drive where your pride and joy used to be.
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
You are on the right track with all of that, and myself I would remove the One Life Live it sticker as a matter of priority!
But that actually looks like a decent Ninety, that is a better roof than the later ribs inside, and it is pretty clean and straight apart from the bad mods.
Pics of the chassis and bulkhead would be interesting?
LincolnSteve
Well-Known Member
- Posts
- 1,204
- Location
- Lincoln
+1. That could put thousands on the value straight away.
I bow to your superior knowledge of defenders.
