cold heated seats

C

coppiceno1

Member

Posts

44

• Oct 17, 2011

• #1

Hi everyone,bit chilly this morning,so i thought i put the heated seats on,oh no cold bum all the way to work,had a look round both sides not working,lights on switches & fuses ok,anybody got any ideas. :doh:

 

sierrafery

Well-Known Member

Posts

17,871

Location

Arad/Romania

• Oct 17, 2011

• #2

I could help u just if u have RAVE, u know how to use it's electrical library/diagrams part and u can handle a multimeter ... if yes, reply and also tell what kind of seats u have, manual or electric cos there is a difference

 

C

coppiceno1

Member

Posts

44

• Oct 17, 2011

• #3

Hi. yes i have rave,mulimeter & the seats are electric,cheers

 

sierrafery

Well-Known Member

Posts

17,871

Location

Arad/Romania

• Oct 17, 2011

• #4

the fact that the switches are illuminated it means that power gets to them...so, first step: Rave > electrical library > connector views > C0969, u'll see C0971 near him, there is no pic about the connector face but u can identify the pins by the colour of the wire in the table near the pic. Put voltmeter (-) on 971 pin 3(O wire) and + on 969 pin 1(K wire) with switch on there must be 12V there... if it is then one of the heater elements(or the contact of it) is burnt... serieal circuit. This procedure is the same for both seats. If no power there we'll go further...

u have the wire colour codes in electrical library - introduction ... good luck

 

Last edited: Oct 17, 2011

C

coppiceno1

Member

Posts

44

• Oct 17, 2011

• #5

cheers, i'll give it a go

 

A

AndyPoole

Active Member

Posts

187

• Oct 18, 2011

• #6

Beware - mine burnt through the seat and then passengers arse after not having been used