Coding injectors with nanocom

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Tillytomp

Tillytomp

Active Member
Posts
585
Location
Hampshire
Guys, just a quick question, my mate has a discovery 2 Td5 2002, that keeps appearing at his garage due to starting issues, the owner has brought new injectors, but my mate is having issues "coding them" the 1st one coded fine, the rest won't despite various attempts, he now has my nanocom, will this help?.
This was only a quick conversation between us, so I have probably missed out the technical bits(sorry)
So I guess my question is, will the nanocom work/help solve this.
Cheers Neil
 
Right, i have gone through 10 pages of posts by Marcomate2 and cant find it:(:(:(

can you post a link pls for us stupid ones :oops:
 
Hi @Tillytomp

What post are you looking at? when I click on the link above I do not see anything about injector coding and it is only one page long?

AFAIK, the nancom is more than capable of modifying / changing the injector codes on a TD5.

Cheers
 
Sorry tilly Don't know how to do links ! It's the 1 with the picy off No1 piston staring to MELT in the middle / PAGE ONE & their are only 6 pages ! I only read it yesterday & when I go in to TD5 it's the second thred down !
 
Actually @Tillytomp

If you go to the nanocom diagnostics website in the forums, and search for injector code there is a lot of info about the coding and type of injector.

It just take some digging thru......:D

Cheers
 
ok so a bit of an update, after a long coversation with my mate, i said i would ask on here, cause you lot know everything;)
The disco in question, has had issues with starting for some time now, so far its had the following (take with a pinch of salt)
2no new fuel pumps in the tank
fuel fiilter
new injectors
new rocker loom (due to oild ingree into the ECU)
ECU cleaned
air filter
The disco does start after about a minute of turning over, and once started she runs and drives fine.

any ideas would be great
 
Hi @Tillytomp

Did you get check about the injector coding?

I know they are "non starting " vids, but have you looked at the videos on YouTube? Useful to look at anyways.

iirc there are 3 of them by these guys.


Also, fuel filter housing being porous has been known to cause a few issues or the valves inside it .

 
Last edited:
Other starting problems can be caused by:
The Crank sensor (CPS): failing/dirty/bad wiring
The starter motor failing, causing electrical noise to interfere with the CPS
Poorly installed injectors: The copper fire washers and the mating surfaces MUST be spotless.
Mark
 
You must log in or register to reply here.

Similar threads

H
D2 ABS Sensors
Replies
3
Views
239
sierrafery
sierrafery
The Wombat
Discovery Td5 Instrument cluster config or programming
Replies
5
Views
604
sierrafery
sierrafery
A
Need someone with a nanocom
Replies
5
Views
806
marjon
marjon
A
TD5 discovery 2 misfire under load!
Replies
1
Views
1K
sierrafery
sierrafery
DollyBird
P38A Searching for die hard P38 guru - EAS
2
Replies
20
Views
2K
DollyBird
DollyBird
Back
Top