Hi just replaced the clutch and slave cylinder on a 02 freelander td4, not getting any feel in the pedal and no gear selection, have bled down the way pumping the pedal and reverse bled too, I've disconnected the pipe to check the master cylinder and the pedal goes rock solid as it should be! Any ideas would be great. Thinking I may have to rip it all apart again!
Clutch
- Thread starter colross
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
freelance
Well-Known Member
- Posts
- 8,685
- Location
- essex and beyond
It is possible that pedal doesn't push master cyl full travel, so not all the air is displaced
disco_mikey
Active Member
- Posts
- 728
- Location
- Dundee, Scotland
Di you fit the clutch the right way round?
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
See my thread on this - it involves pushing all air out of master - cannot be done with pedal.
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
https://www.landyzone.co.uk/land-rover/really-low-clutch-bite.287496/#post-3560240
Amongst other useful things - search for my user and 'clutch'
Amongst other useful things - search for my user and 'clutch'
