Clutch Troule
- Thread starter w4lk3r
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
vehicle?
johnny curt 1
Well-Known Member
- Posts
- 9,118
- Location
- manchester
it needs back bleeding theres still air in the system get an old oil can ( a pump one ) fill it with brake fluid snip the end off and put it on the bleed nipple on the slave cylinder and pump away
its far easier to bleed a clutch this way as air tends to go up rather than down with normal bleeding
its far easier to bleed a clutch this way as air tends to go up rather than down with normal bleeding
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
thrust bearing collapse or clutch fork punched thru.
edit. ignore my post atm
edit again. stuck to the floor as in not returning or just nowt there when you press it?
edit. ignore my post atm
edit again. stuck to the floor as in not returning or just nowt there when you press it?
Last edited:
Having trouble with my clutch, Iv reconed the marster cylinder, Done all the nessesery bleeding but the clutch pedal is still stuck to the floor. Im thinking this is going to cost me
reconed the marster cylinder
buy a new one
