clutch release point

goetz74 · May 19, 2022

Hi, after changing my clutch master and slave cylinder i adjust my clutch like workshop manual.
My question , the clutch pedal was pressed and open/release 4cm before the pedal hits the floor.
Is this ok or not?

Best

robbie the greatl · May 19, 2022

i fitted new clutch a couple of months ago my pedal is at the bottom too as long as its releasing to engage and change gear its ok

Brown · May 20, 2022

I've been through a few clutches, and they all have personalities of their own, especially when I change the cylinders at the same time. They differ a bit in terms of where the bite point ends up in the pedal travel, and how easy it is to control them for activities like creeping along at a junction where you're facing uphill. Provided it's usable and letting you change gear it should be alright.

GRATCH · May 20, 2022

Did you change the clutch fork and it's pivot bolt?

clutch release point

goetz74

New Member

robbie the greatl

Active Member

Brown

Well-Known Member

GRATCH

HUGE MEMBER

Similar threads