Clutch pedal goes to the floor

Garry Homer · Nov 25, 2007

Hi
Has anyone had this problem, the clutch pedal stays on the floor more so when held down for a period say at lights if you lift the pedal the cluch works fine

rriggs · Nov 25, 2007

It's one or other of your clutch cylinders. Do a search on here - there's a lot of posts about it.

Cheers

Rog

Ambriel · Nov 25, 2007

My Hippo has a slightly lazy clutch pedal if it hasn't been used for a while. Soon comes back to normal after an hour or two though.

I've been told this is indicative of the master cylinder failing but I'll worry about that when it gets to be a problem. It looks to be a simple enough job to replace the master/slave assembly anyhow.

loatmead · Nov 25, 2007

If its a td4 then the slave is in the bell houseing (quite a big job ) i would go for the master which is fixed to the bulk head which is £108.00 from LR. Thats what the prob was on mine, clutch is like new now

andytd4auto · Nov 25, 2007

clutch

whats that

rriggs · Nov 25, 2007

andytd4auto said:
clutch

whats that

It's what people who have grown up's gearboxes use to help them change gear...

Cheers

Rog

Tatooboo · Nov 25, 2007

Garry Homer said:
Hi
Has anyone had this problem, the clutch pedal stays on the floor more so when held down for a period say at lights if you lift the pedal the cluch works fine

What year and model is the freelander it would help...
Cheers
D

Optimus Prime · Nov 25, 2007

master cylinder, roberth had the same problem in his manual.

Clutch pedal goes to the floor

Garry Homer

New Member

rriggs

New Member

Ambriel

Active Member

loatmead

New Member

andytd4auto

New Member

rriggs

New Member

Tatooboo

New Member

Optimus Prime

Well-Known Member

Similar threads