Clutch Issue

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
J

JPH

Member
Posts
10
Location
Florida
Hello all - hoping someone can help! My clutch pedal went flat and wouldn't come up. Clutch fluid was leaking and wouldn't stay full.The mechanic came and changed the clutch slave. Now the fluid stays and he said the clutch master cylendar is fine but the clutch pedal is rock hard. Any idea why?
 
Clutch fork failed most likely. Cheap part (get a reinforced one) but gearbox has to be removed to replace it so you need to weigh up if you're goning to do full kit at the same time
 
JPH said:
Yep three times. Also thought something was up with the clutch pedal but that was checked. My fear is the clutch and/clutch fork but it sounds like that's it.
Click to expand...
Fairly common I'm afraid, not a hard job to sort out though. Either buy a reinforced one or buy a standard one and weld some supports on it. I had it happen twice on previous land rovers. Second time around I made my own
 
Marmaduke said:
Fairly common I'm afraid, not a hard job to sort out though. Either buy a reinforced one or buy a standard one and weld some supports on it. I had it happen twice on previous land rovers. Second time around I made my own
Click to expand...
Wow thats crazy twice?!!!?! Well while it's open I'm getting a new clutch as well. For the $1000 labor I may as well. Thanks for the advice and reply! I'm new to the Defender world but I love them. An older defender is something I've always wanted!!
 
JPH said:
Wow thats crazy twice?!!!?! Well while it's open I'm getting a new clutch as well. For the $1000 labor I may as well. Thanks for the advice and reply! I'm new to the Defender world but I love them. An older defender is something I've always wanted!!
Click to expand...
Yeah alas my new 'reinforced' one failed within a month or so :( So I made my own
 
Hello all - so I received the clutch and the mechanic tried to put it in and it doesn't appear to fit. Does anyone know if there are different clutches for the 300tdi engine? Here are pics of the old clutch.
 

Attachments

  • 20210401_171720.jpg
    20210401_171720.jpg
    275.1 KB · Views: 86
Thanks. I was doing a little research and found this. The original clutch is top left, one I received is on the right. The bottom left comes up as one for a 94 defender 300tdi.
 

Attachments

  • 20210401_182118.jpg
    20210401_182118.jpg
    395.8 KB · Views: 93
So what we found is that the thickness of the spline shaft is different. The new one is a little thicker than the original. So it's not only the number of springs but the spline shaft.
 
JPH said:
So what we found is that the thickness of the spline shaft is different. The new one is a little thicker than the original. So it's not only the number of springs but the spline shaft.
Click to expand...
number of springs doesnt mean anything ut theres only 2 spline diameters v8 19mm and diesel 22mm
 
Hey all - clutch is replaced. Now the problem is that when I accelerate it feels the handbrake is on and there is a loud hallow noise coming from under the hood. The engine wants to go but something is holding it back. Any ideas?
 
JPH said:
Hey all - clutch is replaced. Now the problem is that when I accelerate it feels the handbrake is on and there is a loud hallow noise coming from under the hood. The engine wants to go but something is holding it back. Any ideas?
Click to expand...
pulled a turbo hose off?
 
You must log in or register to reply here.

Similar threads

J
Clutch failure
Replies
5
Views
465
dag019
dag019
N
Clutch problem unable to change gear
Replies
9
Views
320
Anaconda
A
P
Clutch stuck 300 tdi
Replies
12
Views
525
D1Nut
D1Nut
Paul Coddington
P38A 2.5 DT manual Clutch Slave
Replies
6
Views
394
Paul Coddington
Paul Coddington
G
Puma Clutch Replacement
Replies
1
Views
647
grayham49
G
Back
Top