Chassis swap

whitstella · Sep 6, 2016

Hi

I've got my chassis ordered today. I've gone for a 300tdi with a td5 rear. ( which I've been told is RoW model now ). I've got a fuel tank and new sender and tank cradle, now im after an exhaust system does anyone know what I need to order.

Cheers steve

Discokids · Sep 6, 2016

Marsland?

Al2O3 · Sep 6, 2016

Is it not RC who do bespoke ones?

whitstella said:
Hi
I've got my chassis ordered today. I've gone for a 300tdi with a td5 rear. ( which I've been told is RoW model now ). I've got a fuel tank and new sender and tank cradle, now im after an exhaust system does anyone know what I need to order.
Cheers steve

If you haven't specified when ordering a bespoke chassis, will you not need to wait until it turns up to see where they have fitted the hangers?

whitstella · Sep 7, 2016

Yeah marslands.

whitstella · Sep 7, 2016

I've already seen the chassis. They are 300 tdi exhaust mounts in the middle it's got none on the tube tub outrigger then the 1 on the rear crossmember. Land rover did make this version of the land rover with a 300 engine and a td5 tub,called rest of the world. But looking for an exhaust system is tricky.

james6546 · Sep 7, 2016

I had some issues with this, I solved them by bending the central hanger and getting the back section welded. I'll get you the part numbers for the central part when I get home this evening.

I am planning on getting a custom stainless one made at some point as the welded part isn't holding up too well so far.

aaronmorris · Sep 7, 2016

Row spec 300tdi exhaust is available, from memory the down pipe is the same.
Middle and rear are part numbers -
ESR4526
ESR4527
If we are talking about a 90 that is?
I have just built a 200tdi 90 with td5 rear tank and made the above work.

Chassis swap

whitstella

Active Member

Discokids

Well-Known Member

Al2O3

Well-Known Member

whitstella

Active Member

whitstella

Active Member

james6546

Well-Known Member

aaronmorris

Head's a shed

Similar threads