Chassis rear out rigger
- Thread starter geoffo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 356
- Location
- Aberystwyth Mid Wales
Don't think so. I was looking for one for a few months but I couldn't find anyone with a new one for sale. I ended up cutting a good one off a Disco that was being scrapped.
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
Ive got to do mine too (300tdi).......
can they be fabricated ? or do they have to be the exact thing ?
can they be fabricated ? or do they have to be the exact thing ?
- Posts
- 9,105
- Location
- Roaming the UK on assignments
Easy bit of sheet metal work, get some 3mm plate a decent bit of white card, make some templates and away you go, easy enough.
Just be sure your welding is up to it! Body mounts are relatively important
Just be sure your welding is up to it! Body mounts are relatively important
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
tidy .
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
Don't forget to post piccies .......
grandadknows
Member
- Posts
- 29
- Location
- Aberdeenshire, Scotland.
If you find the rust maggot has gone further than you first thought, as in my case, see RKD Machine Shop Services Norfolk (I think). Speak to "Skip" on 07870140952 or [email protected].
I used this guy last year and got two rear chassis legs with outriggers and back plate. Superb quality, reinforced sections and easy to weld. Longer than the regular ones offered on eBay.
Good luck.
I used this guy last year and got two rear chassis legs with outriggers and back plate. Superb quality, reinforced sections and easy to weld. Longer than the regular ones offered on eBay.
Good luck.
grandadknows
Member
- Posts
- 29
- Location
- Aberdeenshire, Scotland.
If you find the rust maggot has gone further than you first thought, as in my case, see RKD Machine Shop Services Norfolk (I think). Speak to "Skip" on 07870140952 or [email protected].
I used this guy last year and got two rear chassis legs with outriggers and back plate. Superb quality, reinforced sections and easy to weld. Longer than the regular ones offered on eBay.
Good luck. Andy.
I used this guy last year and got two rear chassis legs with outriggers and back plate. Superb quality, reinforced sections and easy to weld. Longer than the regular ones offered on eBay.
Good luck. Andy.
