Other chassis paint

gstuart · Feb 16, 2017

got some chassis paint this morning

think this is pretty decent stuff

am also waiting for a can spray trigger handle, that should make like easier

ready for when the weather warms up , lol

got to blast all the inside of the chassis out first then steam clean it, along with removing little sections of loose paint

the joys of owning a landy

but enjoying every minute of it

keeps me busy,

RyanDay1 · Feb 16, 2017

@gstuart I'm dinitrolling the D2 come warmer summer weather, how are you steam cleaning it? Are you getting it up on a ramp of any kind? And did ya get the stuff from Rejel in Bedford?

In case you haven't seen it

gstuart · Feb 16, 2017

RyanDay1 said:
@gstuart I'm dinitrolling the D2 come warmer summer weather, how are you steam cleaning it? Are you getting it up on a ramp of any kind? And did ya get the stuff from Rejel in Bedford?

In case you haven't seen it

hi mate

have got a karcher jetwash and also a nilfisk steamer

am thinking of putting it up onto ramps, got some axle stands as well, so when i put the suspension into off road height will be safer if it drops

rejel automotive , yep just looked , in bedford

thks for the video , will have a look at that later

have been looking around at some garage lifts, but they won't allow any spraying

so was thinking , i've got a big enough plastic sheet to put into my drive, put the landy onto the sheet, drive it up onto ramps then clean is all off first

going to take my wheel arch liners out as well, so i can get rid of the mud etc that collects

know the stuff isn't cheap , but a far better option that a rusty chassis , as the chassis is solid , just got some surface rust marks and loose bits of paint

did hear about putting stove paint over the top , or hammerite as a top protection coat , don't know how true that is

if u ever wish to come my way ur more than welcome to borrow my steamer, can give u a hand as well

Marmaduke · Feb 16, 2017

Por15 first and dinitrol on top for me

gstuart · Feb 16, 2017

Marmaduke said:
Por15 first and dinitrol on top for me

didn't realise i had to also put a base coat down

aaaaaahhhhhhh. more money , lol

Marmaduke · Feb 16, 2017

gstuart said:
didn't realise i had to also put a base coat down

aaaaaahhhhhhh. more money , lol

You don't have to but I know if water gets between the metal and waxoyl the chassis will still rust so I've painted it first on the series I'm slowly doing up

gstuart · Feb 16, 2017

this is what i'm going to spray inside the chassis

got to get a long can tube , so i can get right inside the chassis

Amazon product

gstuart · Feb 16, 2017

or maybe this one, sorry for large writing copy and pasted the title in

DINITROL 3125 CAVITY WAX 2 x 500ml AEROSOL SPRAY CANS with 140mm Extension straw nozzles and 600mm Extension nozzle

RyanDay1 · Feb 16, 2017

gstuart said:
hi mate

have got a karcher jetwash and also a nilfisk steamer

am thinking of putting it up onto ramps, got some axle stands as well, so when i put the suspension into off road height will be safer if it drops

rejel automotive , yep just looked , in bedford

thks for the video , will have a look at that later

have been looking around at some garage lifts, but they won't allow any spraying

so was thinking , i've got a big enough plastic sheet to put into my drive, put the landy onto the sheet, drive it up onto ramps then clean is all off first

going to take my wheel arch liners out as well, so i can get rid of the mud etc that collects

know the stuff isn't cheap , but a far better option that a rusty chassis , as the chassis is solid , just got some surface rust marks and loose bits of paint

did hear about putting stove paint over the top , or hammerite as a top protection coat , don't know how true that is

if u ever wish to come my way ur more than welcome to borrow my steamer, can give u a hand as well

Is the steamer the little hoover looking job or the big bucks pressure hotwash thing that I seem to think is what I need? I've got a very decent nilfisk pressure washer but these steam cleaners want 150 quid a day for hire!

gstuart · Feb 16, 2017

RyanDay1 said:
Is the steamer the little hoover looking job or the big bucks pressure hotwash thing that I seem to think is what I need? I've got a very decent nilfisk pressure washer but these steam cleaners want 150 quid a day for hire!

yes the nilfisk is one of the smaller ones , didn't realise u needed one that big

only thing it would worry me using a steamer that big on mine with the huge amount of electronics

if i had the money i would get the body lifted off, is only 8 x bolts

got some quotes and there coming in at £500 to do the full treatment

RyanDay1 · Feb 16, 2017

gstuart said:
yes the nilfisk is one of the smaller ones , didn't realise u needed one that big

only thing it would worry me using a steamer that big on mine with the huge amount of electronics

if i had the money i would get the body lifted off, is only 8 x bolts

got some quotes and there coming in at £500 to do the full treatment

Yeah it would be very easy to hand it over and get it done for you, with the professional cleaning and drying equipment etc. But I just can't fork out half a grand with all I'm spending elsewhere when 130 odd quid buys me a kit to suck it up and get messy and stressed out myself

gstuart · Feb 16, 2017

RyanDay1 said:
Yeah it would be very easy to hand it over and get it done for you, with the professional cleaning and drying equipment etc. But I just can't fork out half a grand with all I'm spending elsewhere when 130 odd quid buys me a kit to suck it up and get messy and stressed out myself

same with me

would also prefer to do this myself, then i know 100 percent it's done right

as i will also spray behind the wheel arch plastic trims , won't take long to remove them

going to get a drain cleaning tube for the karcher, can then push it up inside the chassis and ensure all the drainage holes are cleaned out

also the can trigger handle just turned up , fits a treat on the can

will save my fingers, lol

RyanDay1 · Feb 16, 2017

gstuart said:
same with me

would also prefer to do this myself, then i know 100 percent it's done right

as i will also spray behind the wheel arch plastic trims , won't take long to remove them

going to get a drain cleaning tube for the karcher, can then push it up inside the chassis and ensure all the drainage holes are cleaned out

also the can trigger handle just turned up , fits a treat on the can

will save my fingers, lol

View attachment 117554

Nice, you do it yourself so you know how well its been done, and I do it myself so I know just badly its been done

Other chassis paint

gstuart

D3 Grandad

RyanDay1

Well-Known Member

gstuart

D3 Grandad

Marmaduke

Well-Known Member

gstuart

D3 Grandad

Marmaduke

Well-Known Member

gstuart

D3 Grandad

gstuart

D3 Grandad

RyanDay1

Well-Known Member

gstuart

D3 Grandad

RyanDay1

Well-Known Member

gstuart

D3 Grandad

RyanDay1

Well-Known Member

Similar threads