landrover11019
Active Member
- Posts
- 850
- Location
- essex
Had my 110 2.5 N/A for about 3 yrs now and thought I would change the oils, g/box, trans box, axles.
What do you recommend?
What do you recommend?
Changing the oils.
- Thread starter landrover11019
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
hughesy
Well-Known Member
- Posts
- 4,200
- Location
- Isle of Anglesey
Doing it a wee bit more often
landy10
New Member
- Posts
- 1,872
ep90 for the trans box and axles and mt 75 for the gearbox
dirty hands
New Member
- Posts
- 371
- Location
- North Yorkshire
Always use the right type, g/box is ATF, trans box and axles are EP90..GL4...or summat like that. Do you have a manual?
landy10
New Member
- Posts
- 1,872
Not ATF in't gearbox, MT 75 is better.
Dont atf fook the gearbox coz its to thick, or is that me?
Dont atf fook the gearbox coz its to thick, or is that me?
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
Is you too thick???
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
From 1983 to 1995...
manual gearbox- ATF to M2C33
Transfer box - SAE 80/90 to API GL4, MIL-L-2105, or better
Front and rear axles- " " " "" " " " " " " " " " " " " " " " " " " " " " " "
Swivel pin housings- " " " " " " " " " " " " " " " " " " " " " " (or one shot grease)
manual gearbox- ATF to M2C33
Transfer box - SAE 80/90 to API GL4, MIL-L-2105, or better
Front and rear axles- " " " "" " " " " " " " " " " " " " " " " " " " " " " "
Swivel pin housings- " " " " " " " " " " " " " " " " " " " " " " (or one shot grease)
landrover11019
Active Member
- Posts
- 850
- Location
- essex
Oooops, been top up gearbox with EP90.
Oddie
AntiSeptic Sandal Wearer
- Posts
- 26,178
- Location
- In a puddle in Kernow
then drain it and change it quick!!! it will munch yer gears n syncros!
