center console
- Thread starter newson
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Grippa
New Member
- Posts
- 12,310
- Location
- Where the winches aren't.
Ammer?
You int said what year? Disco 1, 2 or really poncy one?
You int said what year? Disco 1, 2 or really poncy one?
Grippa
New Member
- Posts
- 12,310
- Location
- Where the winches aren't.
Missed any fasteners at the front? Behind the bit that turns upwards towards the dash? Any in cubby box?
nicedayforit
New Member
- Posts
- 588
- Location
- The village of the dead
2 screws in cubby box, 2 screws at front end, 1 screw next to handbrake.
You need to undo the handbrake cable from the handbrake lever in order to get the handbrake up vertical and the lift out consol.
Be careful nut to let the ratchet pawl spin thro 180 degrees when you pull the lever up.
You need to undo the handbrake cable from the handbrake lever in order to get the handbrake up vertical and the lift out consol.
Be careful nut to let the ratchet pawl spin thro 180 degrees when you pull the lever up.
