Carb replacement
- Thread starter Mingus
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 63,105
- Location
- Gloucestercotshirewolds
Mines been fitted for about 3 months, no issues so far.
Reviews suggest quality control is a bit hit and miss so it's probably the luck of the draw.
Reviews suggest quality control is a bit hit and miss so it's probably the luck of the draw.
Simon Perks
Active Member
- Posts
- 318
- Location
- Switzerland East
I bought one and although it ran ok the tickover was horrible, in the end i bought the refirb kit from paddocks and serviced the original .. much much better ...
300bhp/ton
Well-Known Member
- Posts
- 5,009
- Location
- Near MK
My Series had a replacement carb. Not sure if it’s origins but was probably a cheap one. It ran fine for ages. Then I had major running issues with it. Not sure what the problem was exactly but it was carb related. I stripped it down about a dozen times. Sometimes it would run ok then wouldn’t. Never did find the exact cause but something wasn’t right somewhere.
I then fitted an SU (HS6 maybe, would need to check) by way of an adapter. I never got the fuelling quite bang on (a little rich) but it ran very well and very reliably.
I then fitted an SU (HS6 maybe, would need to check) by way of an adapter. I never got the fuelling quite bang on (a little rich) but it ran very well and very reliably.
