Rocky Ward
Active Member
- Posts
- 145
- Location
- Burton on Trent
I have a trialer based on a series 2a that has been modded by a previous owner.
Most of the non standard parts like the 200TDi are from a donor Discovery 1 Auto.
I have a damaged intercooler and need to replace it like for like with whats already fitted.
The body of the intercooler is what looks like a 200 / 300 tdi but the elbows are not like any I can see when googling etc.
The elbows are in opposing corners and are pointing inwards, most stock photos show 1 elbow in the centre or both on the same side.
Mine has them in opposite corners and I can't find one like mine anywhere.
Can anyone shed some light on what mine is off ?
I have examined the elbows closely and it seems factory and there is no evidence to suggest it was modified to be like this.
Thanks, Karl.
Most of the non standard parts like the 200TDi are from a donor Discovery 1 Auto.
I have a damaged intercooler and need to replace it like for like with whats already fitted.
The body of the intercooler is what looks like a 200 / 300 tdi but the elbows are not like any I can see when googling etc.
The elbows are in opposing corners and are pointing inwards, most stock photos show 1 elbow in the centre or both on the same side.
Mine has them in opposite corners and I can't find one like mine anywhere.
Can anyone shed some light on what mine is off ?
I have examined the elbows closely and it seems factory and there is no evidence to suggest it was modified to be like this.
Thanks, Karl.