Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Good! New battery is a good idea. Dont want to go setting off the numerous other issues as well!
Can not get into discovery 2
- Thread starter Miller83
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Good! New battery is a good idea. Dont want to go setting off the numerous other issues as well!
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Well, I did not need to write all this , LOL
Good news.
Now is your EKA code and key code in the owners manual?
Having thought about this,
Discool makes a good point. That the lock could be jammed due to lack of use. Maybe a good dose of WD40 / plus gas or similar and leaving for a few hours / overnight willl help.
You need to get hold of your EKA, as without that you are not going to be able to use the door lock to overcome the immobiliser.
If the door lock does not work, after a good dousing of release agent, then I can only think smashing the cheapest and easist to replace window that you can get through and get your owners manual. You will want to have at hand the kit ready to disconnect the battery as it will get noisy.
Hopefully the owners manual has your EKA code and the key code in it.
If it does, then get a new key cut, hoping the locks have not been changed, use key to enter EKA code.
I do not see any way around it at the moment.
Cheers and Good luck.
Good news.
Now is your EKA code and key code in the owners manual?
Having thought about this,
Discool makes a good point. That the lock could be jammed due to lack of use. Maybe a good dose of WD40 / plus gas or similar and leaving for a few hours / overnight willl help.
You need to get hold of your EKA, as without that you are not going to be able to use the door lock to overcome the immobiliser.
If the door lock does not work, after a good dousing of release agent, then I can only think smashing the cheapest and easist to replace window that you can get through and get your owners manual. You will want to have at hand the kit ready to disconnect the battery as it will get noisy.
Hopefully the owners manual has your EKA code and the key code in it.
If it does, then get a new key cut, hoping the locks have not been changed, use key to enter EKA code.
I do not see any way around it at the moment.
Cheers and Good luck.
brian47
Well-Known Member
- Posts
- 8,867
It's highly unlikely that the EKA code is in your owners handbook, unless a previous owner has written it in there. All the security information was provided by LR to the first owner on a small card about the size of a credit card. So it's the first thing to go missing.
You'll be able to get all the necessary information from your nearest LR main dealer free of charge. They will require proof of ownership; the V5 document. They might also have the original reference for cutting the key to fit the door lock.
You'll be able to get all the necessary information from your nearest LR main dealer free of charge. They will require proof of ownership; the V5 document. They might also have the original reference for cutting the key to fit the door lock.
discool
Well-Known Member
- Posts
- 13,609
OK what about both, on a card and in the owners handbook
needmoretools
Active Member
- Posts
- 364
- Location
- Holbeach next to the sea/marsh
Sometimes in the morning on my
d2 td5 using the remote control to open the doors nothing happens red light still flashing so I unlock the drivers door. The central locking works and the doors unlock I have opened the door at 4 am good job I've no neighbours near me and the alarm goes off. And the next time it happened after the central locking opened it I pressed the unlock on the remote and the alarm and turned. This happens for a few days in a row then nothing for a few weeks or months then again for few day's. And doesnt do it on a cold or wet day etc.
d2 td5 using the remote control to open the doors nothing happens red light still flashing so I unlock the drivers door. The central locking works and the doors unlock I have opened the door at 4 am good job I've no neighbours near me and the alarm goes off. And the next time it happened after the central locking opened it I pressed the unlock on the remote and the alarm and turned. This happens for a few days in a row then nothing for a few weeks or months then again for few day's. And doesnt do it on a cold or wet day etc.
Miller83
Member
- Posts
- 10
- Location
- Rugby, Warwickshire
Had a look in the owners handbook and to my surprise the card with the security codes were there
All I need to do now is sort out the drivers door look in case it happens again
All I need to do now is sort out the drivers door look in case it happens again
