Can I stop my P38 mirrors moving when reversing?
- Thread starter v8rly
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
a noob that listens sorry i cant help mate (deepender man through and through) but sure 1 of the rangey boys will be along soon
rewmer
Well-Known Member
- Posts
- 2,082
- Location
- Clacton, Essex, UK
For sure. Stick it in reverse with the ignition on 2, engine off, press and hold the memory button and either 1 or 2 depending on which you use. Should get a message on the dash.
Datatek
Well-Known Member
- Posts
- 44,836
- Location
- Near Poitiers SW France
Just stick it in reverse and manually adjust the mirrors to the normal setting. I think the feature can be turned off in the BECM.
Tervueren
New Member
- Posts
- 646
Bloody Electrics Cause Mayhem
Don't worry about it for now but you'll soon come to play with it
It's a big fook off magic box under drivers seat
rewmer
Well-Known Member
- Posts
- 2,082
- Location
- Clacton, Essex, UK
Yes the memory button on the seat.
garioch43
Active Member
- Posts
- 352
- Location
- Aberdeen, Scotland
v8rly,
BECM stands for Body Electronic Control Module. It is located under a the big plastic cover in the left hand front corner of the engine bay.
P38 Range Rover - How the becm works, Its controls and Functions-P38 Range Rover Electrical Common faults and Fixes
BECM stands for Body Electronic Control Module. It is located under a the big plastic cover in the left hand front corner of the engine bay.
P38 Range Rover - How the becm works, Its controls and Functions-P38 Range Rover Electrical Common faults and Fixes
Tervueren
New Member
- Posts
- 646
Hi, iv just tried the seat button method, unfortunately this has not solved the issue, I didnt get a message on the dash either. I should have probably said previously my mirrors are going up when in reverse rather than down as apparently they should.
Any further suggestions anybody?
Any further suggestions anybody?
rasheed
Well-Known Member
- Posts
- 1,815
- Location
- Bangladesh
V8rly - thanks for coming back to tie up the thread - and for exposing the apparently multiple hiding places of the BECM! :welcome2:
Derek Ward
Active Member
- Posts
- 798
Start off with your normal position for the mirror, ign on and in reverse, adjust mirror to where you want it when reversing, press memory seat and either button 1 or 2.
To disable the function, ign on and in reverse, press and hold memory seat for 2 seconds - should then be a message in the dash saying 'mirror dip off'.
To re-enable - same again.
To disable the function, ign on and in reverse, press and hold memory seat for 2 seconds - should then be a message in the dash saying 'mirror dip off'.
To re-enable - same again.
rewmer
Well-Known Member
- Posts
- 2,082
- Location
- Clacton, Essex, UK
You can set them to any angle when in reverse.
garioch43
Active Member
- Posts
- 352
- Location
- Aberdeen, Scotland
Damn!
I thought it was and then I looked at that stupid web page, saw the first picture and jumped to the wrong conclusion.
As Homer Simpson would say..."Always trust your gut!"
I thought it was and then I looked at that stupid web page, saw the first picture and jumped to the wrong conclusion.
As Homer Simpson would say..."Always trust your gut!"
Worked a treat. Both mirrors pointing were I want them now. Thank you.:clap2:
breakermart
New Member
- Posts
- 15
- Location
- leicester
yes the BECM is under drivers seat, it has fuses located on its side, iv just had to replace mine for £465. it controls any and everything electrical and loves to decide when it wants to stop you using the range rover. it spends alot of its time talking to the ecu and when its not doing that its busy having your pants down! lol
