Can copper slip be used on brake unions?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bankz5152

bankz5152

Well-Known Member
Posts
9,311
Location
South London/North Kent
Afternoon all,

Quick question. After rounding off one union and 2 bleed nipples is there any reason I can't put a little copper slip on the new ones? Hopefully make it easier next time?
 
Can be used but it might be a good idea to make sure it doesn't get in the fluid, just on the threads.
 
bankz5152 said:
Afternoon all,

Quick question. After rounding off one union and 2 bleed nipples is there any reason I can't put a little copper slip on the new ones? Hopefully make it easier next time?
Click to expand...
are you using what is called line wrenches (spanner for u Brits)
50daa574.jpg
 
I generally use clean grease on bleed nipple threads as an anti rust compound.

I assume that any contamination of those little flakes of copper in my fluid and working seals in my braking system are mutually exclusive.
 
Copraslip on threads will do no harm. Get some brake spanners as in Johns post. Make sure they are single hex and on no account bihex. Never use bihex spanners on brake unions or bleed nipples.
 
and also put a bit of copper grease 'tween the pipe and the inside of the union on the male fittings - the girls too, if you can - but the surface inside here is much smaller ( o_O ).

defo keep it out of the fluid, as much as humanly possible:)
 
Disco1BFG said:
and also put a bit of copper grease 'tween the pipe and the inside of the union on the male fittings - the girls too, if you can - but the surface inside here is much smaller ( o_O ).

defo keep it out of the fluid, as much as humanly possible:)
Click to expand...

Isn't that what ear buds are really for? ;):D
 
Got proper union spanners, got it off but as I turned it was rounding so much so that I won't be able to do it back up properly.

Thanks, used minimal slip on the nipples I took off today. Slowly but surely it all going back together! To think all I wanted to do was change my brake pads!
 
I'm trying to add in a link to Amazon but this sodding software is being far too clever...

...here's a picture of the effing things =>

103730d1341783846-replacing-brake-lines-vice-grips-special.jpg
 
bankz5152 said:
Got proper union spanners, got it off but as I turned it was rounding so much so that I won't be able to do it back up properly.

Thanks, used minimal slip on the nipples I took off today. Slowly but surely it all going back together! To think all I wanted to do was change my brake pads!
Click to expand...

Change the pipe or tube nut.
 
Stretch said:
I'm trying to add in a link to Amazon but this sodding software is being far too clever...

...here's a picture of the effing things =>

103730d1341783846-replacing-brake-lines-vice-grips-special.jpg
Click to expand...

Great maybe as a last resort if the tube nut is never going to be used again or you are interested in crimping it onto the pipe.
 
bankz5152 said:
Got proper union spanners, got it off but as I turned it was rounding so much so that I won't be able to do it back up properly.

Thanks, used minimal slip on the nipples I took off today. Slowly but surely it all going back together! To think all I wanted to do was change my brake pads!
Click to expand...

I know that feeling, went to change my brake pads the other week, ended up replacing both front calipers, carriers, and flushing the whole system with new oil lol
 
You must log in or register to reply here.

Similar threads

MikeFl4
P38A Brake bleeding disaster
Replies
16
Views
2K
MikeFl4
MikeFl4
MollyNomad
Freelander 1 ‘The Lambada’..(Three steps forwards..Two steps back/Rinse and repeat..) AKA Brakes Bled!!
Replies
0
Views
786
MollyNomad
MollyNomad
Skyisthelimit
No impulse on Discovery 1 1991 model V8 3.5 right hand drive.
Replies
12
Views
819
classic kev
classic kev
xDParis64
VCU test result + Lift Kit
Replies
8
Views
1K
xDParis64
xDParis64
MollyNomad
Getting closer..
Replies
4
Views
1K
Alibro
Alibro
Back
Top