Can anyone identify what these are for...?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Frosty555

Frosty555

New Member
Posts
6
Location
Northants
When I picked up my Defender, there was a load of stuff in the back (spare seats, various bolts, spare seatbelts, etc). Amongst them, were these:

photo-1.jpg


Anyone have any idea what they're for? The plate holes don't seem to line up with anything in the back, nor on the outside of the Landy.

Any ideas?
 
Yes, I'm looking to refit the individual side seats that face inwards.

I've googled for pictures of them installed, but can't seem to find one that shows these bars.

Thanks for everyone's help so far! :)
 
What little I can offer, is when I had my rear cross member replaced, the outer edge bolts went through the bottom end of the bracket. I.e. the bottem end of the bracket is bolted firmly to your rear cross member and is visible at the bottom or the rear arch behind the rear wheel.

At a guess the top bolts are near the central part of the rear cab, probably visible behind the covers to the rear lights and upper rear trim covers, from inside the rear of the vehicle.

Edit: Hmmm. Just had a look in the back of me CSW. Think I'm right about linking to the rear cross member, but I have tubular rail then running behind where the seats go, along the back top of the box section. The lap belts for the seats bolt onto this rail.
 
Last edited:
You must log in or register to reply here.

Similar threads

jimllshiftit
Can anyone identify what these chassis' are, please?
Replies
16
Views
2K
Brown
Brown
S
what are these brackets for
Replies
6
Views
538
Ric82
Ric82
S
What seats are these?
Replies
4
Views
866
tottot
tottot
Brown
TD5 electronic faults - any ideas?
Replies
15
Views
2K
Brown
Brown
S
Wiper Parking
Replies
9
Views
909
tottot
tottot
Back
Top