Can anyone help am building six wheel p38 anyone done one?
- Thread starter Ejn1
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Sounds like he's making an elongated one by welding 2 rears together. Bit like the classic fire-tender, perhaps?
Strange idea but guess he has his reasons. Zed might have an idea. He's pretty adventurous with his tinkering.
A modern(-er) version of this? https://upload.wikimedia.org/wikipe...ver_Airport_Crash_Tender_-_Elvington_-_BB.jpg
Strange idea but guess he has his reasons. Zed might have an idea. He's pretty adventurous with his tinkering.
A modern(-er) version of this? https://upload.wikimedia.org/wikipe...ver_Airport_Crash_Tender_-_Elvington_-_BB.jpg
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
I've already got one, a spare, one on each corner and a steering.
Falk
Active Member
- Posts
- 193
- Location
- Devon/Yorkshire
Had to beef up a truck and we decided to put extra axle on. Think first decision you have to make is whether you want either -
1) 6 wd (a much bigger job)
2) 4 wd and a dead axle (still a big job)
Usage would dictate - if its for load bearing only then 4wd would do the job, wouldn't imagine you would want to be off roading in this as it would bottom out all the place!
But if you wanted to go for 6wd, and have serious usage on it - then just run it off the rear diff. But you'd have to beef that up, the rear prop, the vcu, the transfer and the gearbox. And have to look into getting it properly set up for wind and vibes.
The actual welding the extra length on to extend the body i couldn't give any opinion on (my welding leaves a lot to be desired!)
What are you wanting to use it for?
1) 6 wd (a much bigger job)
2) 4 wd and a dead axle (still a big job)
Usage would dictate - if its for load bearing only then 4wd would do the job, wouldn't imagine you would want to be off roading in this as it would bottom out all the place!
But if you wanted to go for 6wd, and have serious usage on it - then just run it off the rear diff. But you'd have to beef that up, the rear prop, the vcu, the transfer and the gearbox. And have to look into getting it properly set up for wind and vibes.
The actual welding the extra length on to extend the body i couldn't give any opinion on (my welding leaves a lot to be desired!)
What are you wanting to use it for?
biketeacherdave
Well-Known Member
- Posts
- 4,885
- Location
- south east london
No.............next!
- Posts
- 6,395
- Location
- North Perthshire
...or alternatively, get hold of a Pinzgauer 712
Falk
Active Member
- Posts
- 193
- Location
- Devon/Yorkshire
Haha howling vehicles, had the (dis)pleasure of living out of them for a few weeks. And they love to roll!
wil2813
Well-Known Member
- Posts
- 2,324
Mind you, if he's thinking of adding an extra front axle that might be 'interesting'
yes me lady
Falk
Active Member
- Posts
- 193
- Location
- Devon/Yorkshire
Mind you, if he's thinking of adding an extra front axle that might be 'interesting'
How about a half track?
Just want to know why he would want a 6 wheeler P38!
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Falk
Active Member
- Posts
- 193
- Location
- Devon/Yorkshire
edited for accuracy
Do you mean everyone else is under the bonnet every few weeks? Thought it was just me
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Do you mean everyone else is under the bonnet every few weeks? Thought it was just me
Nah, your just one member of a big club
ovalandrover
Well-Known Member
- Posts
- 1,610
Nah, your just one member of a big club
Are you boasting about your member being a big club?
ovalandrover
Well-Known Member
- Posts
- 1,610
Might be easier to fit P38 body to one of these
https://www.australianfrontlinemachinery.com.au/all-vehicles/land-rover-6x6s#.VZPbtflViko
I like those. That ambulance is very tempting.
Even more so if four of it's mates turned up three months later.
Datatek
Well-Known Member
- Posts
- 44,888
- Location
- Near Poitiers SW France
bushwwacker
Well-Known Member
- Posts
- 6,154
- Location
- Here
