Cable connection to heater flaps

Hi,
Please can anyone describe how the cable directing the air flow connects to the heater flaps ? Or even have a photo of the cable connecting to the flaps ?

I'm in the middle of rebuilding my 1990 Defender and it seems the one thing I didn't photograph on the strip down was the inside of the fascia/dash. I've checked the the workshop diagrams but whilst they show the cable and the pin (numbered 17 below), they don't show how the cable/pin is connected to the flaps.



Thanks for any/all help !
Regards,
David L.

Cannot see your attached picture.

Do you mean this part?


Cheers

Neilly, THANK YOU !

That was not the diagram I linked to - mine was from Land Rover Workshop but it didn't show the actual coupling. The bottom right hand diagram in your picture was exactly what I needed. Thank you ! I thought it was something like that - and had bought a replacement pin, but despite being advertised as the pin for the heater flaps, it seems it's the pin for the cables on the heater box itself. It's too big for the hole in the heater flaps. I need to find the right part.
Thanks again for your help.

Regards,
David L.

hrgDavid said:

David L.

Click to expand...

This may help, just confirm the part number against your VIN if possible.

http://www.allbrit.de/UNI.cfm?PAGE=760853&SPRACHE=EN

Cheers

Thanks Neilly - yes, that's the diagram I posted. The part number I need is 566902 (17 on that diagram) - but it seems I was sent RTC5978 (15 on that diagram).

Will try again now !
Thanks