Bye bye grey trim!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
"Forever Black Dye Kit"
found some very good reviews on the web, not tried it yet, will update when I've done the deed.
 
iv used old engine oil in the past if i havnt got any wd40 or boot pollish layin about , mite try the heat gun thing next
 
Here is my last Freelander when I had the bumpers and arches painted.
freelander4.jpg
 
3lander4x4 said:
iv used old engine oil in the past if i havnt got any wd40 or boot pollish layin about , mite try the heat gun thing next
Click to expand...

Heat gun makes it look like new and lasts a long time.
i did mine last year and it still looks ace, when it gets a clean.


just be carefull round the lights and fuel filler:eek:
 
You can buy 5L of wd40 with a spray bottle cheap on e bay. Good fer cleaning. :)
 
Hi. The back end of my 2002 TD4 was grey when I bought it. I've tried a few products all were short lived, looked fantastic for the first few weeks. Then a dealer friend told me to try Forever Black, 8 months later still looks like new, highly recommend. Malcolm.
 
Hi

What was the outcome using the forever black dye kit? My bumpers and wheel arches have been heat gunned by the previous owner and now look terrible, so was wondering if the forever black dye kit works before I go down the route of having all the external trim painted or replaced.
 
Again, boiled linseed oil for me, tried all manner of products in the past and most have disappointed, makes the roof on the 3 door look great as well.
 
Be careful with boiled linseed oil. Rags with boiled linseed oil on can self ignite. Leave them in a bucket of water when finished.
 
Sucram said:
Hi

What was the outcome using the forever black dye kit? My bumpers and wheel arches have been heat gunned by the previous owner and now look terrible, so was wondering if the forever black dye kit works before I go down the route of having all the external trim painted or replaced.
Click to expand...

I've used this on mine and it works and is easy to do. It comes with a cleaner solution to use first then apply the forever black, normally needs 2/3 coats to blend in good.
 
You must log in or register to reply here.

Similar threads

M
A bit has fallen off!!
Replies
11
Views
559
Scooby22
Scooby22
Skihorn
Door Sill Trim Clips
Replies
8
Views
801
Skihorn
Skihorn
F
Freelander 2 (LR2) Freelander 2 - XS trim?
Replies
2
Views
882
Freelandy11
F
MAF Diver
Disco 2 Rough idle in a V8 D2a — tried MAF, O2, sparks, leads
2
Replies
35
Views
3K
marjon
marjon
J
2.5TD J19 grey/black smoke
Replies
2
Views
699
FlyingPete
FlyingPete
Back
Top