mickdundee
Member
- Posts
- 30
i'm going to look at a 90 pickup tdi, 95 in the next few days for a wee project, ive been told the bulk head needs work but what else should i look out for?
buying guide
- Thread starter mickdundee
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ActionDan
New Member
- Posts
- 57
- Location
- Warwickshire
This thread has a checklist attached that I made recently before buying a 300Tdi 90.
I ended up with going with one that didn't tick all the boxes and I definitely didn't spend as long poking/hitting the chassis as a should have (hence I am looking at getting the bulkhead outriggers replaced)
From what I have gathered, bulkhead replacement can be quite a big job and it is integral to the structure of the vehicle so you can't get away with too much corrosion to it.
I ended up with going with one that didn't tick all the boxes and I definitely didn't spend as long poking/hitting the chassis as a should have (hence I am looking at getting the bulkhead outriggers replaced)
From what I have gathered, bulkhead replacement can be quite a big job and it is integral to the structure of the vehicle so you can't get away with too much corrosion to it.
ScratchyDom
Well-Known Member
- Posts
- 1,151
- Location
- Norf Dorset
A search button.
mickdundee
Member
- Posts
- 30
Station House
Well-Known Member
- Posts
- 3,960
- Location
- Fife, Scotland
