pardec
Active Member
- Posts
- 993
- Location
- South Manchester- North Devon
the PTC heater is on the heater matrix
the relay should be on the bulkhead
the relay should be on the bulkhead
Burnt out relay
- Thread starter urbandekay
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
The only things bolted to the rad are the cooling fans and fan controller
teddywood1
Well-Known Member
- Posts
- 5,558
- Location
- stoke-on-trent
you are right Nodge68 I do not know what I was thinking of when I said that it is of course my fans control unit and it sits in the plastic that also goes around the fans I do not think I have a ptc and I am not going to try and look on the inside heater matrix.
urbandekay
Active Member
- Posts
- 225
- Location
- Berkhamsted
Turns out it is the glow plug relay, or at least, that is the opinion of Chipperfield Landrover or Looters as they like to call themselves not
urbandekay
Active Member
- Posts
- 225
- Location
- Berkhamsted
Sorry typo, that should read 'Lookers'
The glow plug power controller (it's not a simple relay) is mounted to the front of the engine block, just below the glow plugs. It definitely isn't where the OP has damage.
Had same relay melt ( caught early ish) had to replace a couple of terminals in the holder. The relay is for the front heated screen and the fuses in the box next to it are the fuses for the screen ( screen in 2 separate elements) .
Would be worth checking the window connection where they connect to the internal wiring ( mine was twisted and taped by the windscreen company) under the scuttle plate. Mine had melted at the taped connection and relay base all sorted know..did look around and you can buy relay bases that you can crimp and put together yourself only problem the are not waterproof .
Would be worth checking the window connection where they connect to the internal wiring ( mine was twisted and taped by the windscreen company) under the scuttle plate. Mine had melted at the taped connection and relay base all sorted know..did look around and you can buy relay bases that you can crimp and put together yourself only problem the are not waterproof .
Similar threads
