flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
Bull Bars - MoD Surplus?
- Thread starter NormanLaw
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
NormanLaw
New Member
- Posts
- 57
- Location
- Shropshire
Thank you; I see Hammerite do a direct to galvanised paint - would this obviate the need to etch-prime?
Regards
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
Temporarily but it will flake off.
Do it proper first time, wash it, couple of coats of acids etch primer then normal primer then whatever colour paint you like on top then it will last
Later when I am home I will look at the cans I have in the garage, I know one of the acid etch primers I have I am quite impressed with I just can't remember the brand lol
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
Hammerite isn't as good as it used to be, it's okay tho
NormanLaw
New Member
- Posts
- 57
- Location
- Shropshire
That would be really helpful, thanks
Auldgreen90
Active Member
- Posts
- 106
I've used the Hammerite special finishes primer on mine for galvanised metal. It etches it first. Was paint applied only boring part was doing the mesh.
Auldgreen90
Active Member
- Posts
- 106
NormanLaw
New Member
- Posts
- 57
- Location
- Shropshire
Thanks; not the same but very similar.
