Bulkhead change

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Right ok...

Does anyone know what the little square fasteners are called that you can then screw the self tappers into... I need these for my floor.
 
discomania said:
Can you get the wings off the bulkhead without first taking the arches off?
Click to expand...
Ah'm sure ye can. It's bin a while since ah had mine off. Try taking the rubber/plastic things off furst, ah'm almost sure ye can get tae the bolts from there. If not, try taking the vents off and see if that helps. If ah remember rightly, ye don't have tae take the bolts right out as the wings are slotted...hang on, ah'll go take a pic of me old ones....
here ye go
http://i266.photobucket.com/albums/ii264/bustersbus/wings002.jpg

http://i266.photobucket.com/albums/ii264/bustersbus/wings001.jpg

When ah replaced ma wings, ah bolted the metal wheel arch on before puttin' it back on.
like ah said, it's bin a while!!:eek:
 
if you remove the wheel spat eyebrow things and have skinny arms / hands or a very long ratchet extender arm, a bright head torch and the patience of a saint - you can do it. The threads are very course and it only takes a couple of turns to undo them. Don't forgret the very obvious bolt at the top of the wing, like I did and bend the wing.
 
You must log in or register to reply here.

Similar threads

R
Galv Bulkhead
Replies
3
Views
282
dag019
dag019
B
bulkhead
Replies
7
Views
487
Dauphproto
D
lightning
l didn't think the TD5 was as prone to rust as the earlier models.
Replies
17
Views
1K
KISSMYAURA
KISSMYAURA
C
repairing bulkhead in situ
Replies
2
Views
235
ER1C
ER1C
Brenda__the__Defender
110 crewcab help
Replies
2
Views
508
Brenda__the__Defender
Brenda__the__Defender
Back
Top