Broken Timing Belt

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Did the cam/crank dots line up with arrows and match the EP measured with dti , as you mentioned it was a bit off earlier in post 83 but you might have just went with that

have you followed the manual timing instructions for the early or later engine
is solenoid getting voltage and working ok


1724861147108.png
 
Last edited:
steve2286w said:
Did the cam/crank dots line up with arrows and match the EP measured with dti , as you mentioned it was a bit off earlier in post 83 but you might have just went with that
Click to expand...
Hi Steve

Yes everything lined up...3 dots on 3 arrows.
Tappets all set.
Took a video of each injector to illustrate spray...looks great to me!! But it wouldn't let me upload!!
 

Attachments

  • 20240828_175046.jpg
    20240828_175046.jpg
    78.1 KB · Views: 55
Ok.

I am about at the point of giving up on this engine.....haven't made any progress in weeks.

Will just save up and buy a running engine...I've spent long enough on it.

Thanks for the pointers.

Steve
 
steve2286w said:
and when dots lined up did it match the max EP measured with DTI see fault table above
Click to expand...
Yes everything on the list ticked....

All point to defective pump which is wierd as its the only thing on the engine I haven't messed with. Will start saving and see what santa brings...no idea how much a replacement pump is....
Cheers
 
If this was a rebuilt petrol engine I'd bet good money on the distributor being set one revolution out.
109Santana said:
Yes everything on the list ticked....

All point to defective pump which is wierd as its the only thing on the engine I haven't messed with. Will start saving and see what santa brings...no idea how much a replacement pump is....
Cheers
Click to expand...
Whereabouts are you? Plenty of people from here wouldn't mind dropping in for a cup of tea.
 
boguing said:
If this was a rebuilt petrol engine I'd bet good money on the distributor being set one revolution out.

Whereabouts are you? Plenty of people from here wouldn't mind dropping in for a cup of tea.
Click to expand...
I live in spain...you're welcome to drop in for tea!!
Unfortunately there were millions of santana built here but so little by the way of forums, parts, mechanics etc.
Spain has very little in second hand motors...especially for modification as it is not allowed here!!

Cheers
 
I've gone back to the beginning of the thread and @tottot is certain that you must use the pin into the side of the injection pump.

Have you done that?

This isn't magic or bad luck. As you say, the pump was fine before, so still is now. The timing is wrong.
 
boguing said:
I've gone back to the beginning of the thread and @tottot is certain that you must use the pin into the side of the injection pump.

Have you done that?

This isn't magic or bad luck. As you say, the pump was fine before, so still is now. The timing is wrong.
Click to expand...
Yes I did the pump timing with the pin in the side and the arrow lined up with the mark.
I have done the timing several times with several methods and I'm now sick to death of it.
I'm not doing any more to it for a while....if you've been to the begining of the thread you'll know I've been going round in circles....something is obviously wrong....but what???
Cheers
 
Well, I do sympathise, and walking away from it for a while is a good idea. But DON'T buy another engine, this one's fine but we're missing something.

You know I mentioned the distributor being out a few posts ago? Yep, me five years ao after rebuilding a 2.25 petrol. Got thoroughly fed up and had a couple of days off before the penny dropped.
 
boguing said:
Well, I do sympathise, and walking away from it for a while is a good idea. But DON'T buy another engine, this one's fine but we're missing something.

You know I mentioned the distributor being out a few posts ago? Yep, me five years ao after rebuilding a 2.25 petrol. Got thoroughly fed up and had a couple of days off before the penny dropped.
Click to expand...
This one is 2.5 diesel and should be sooooo simple.
 
This thread has a happy ending and similar

www.landyzone.co.uk

12J exhaust peak timing

I am based in Ireland and have a 1985 90 with 2.5NA engine 12J. I am putting the engine back together following a problematic timing belt change (threads damaged on some studs). During the process the crank was accidently moved and I am now unsure about the timing marks. I want to ensure that...
www.landyzone.co.uk www.landyzone.co.uk

It’s off the defender thread and also worth a search on that forum, and more people might have had similar experiences
 
steve2286w said:
This thread has a happy ending and similar

www.landyzone.co.uk

12J exhaust peak timing

I am based in Ireland and have a 1985 90 with 2.5NA engine 12J. I am putting the engine back together following a problematic timing belt change (threads damaged on some studs). During the process the crank was accidently moved and I am now unsure about the timing marks. I want to ensure that...
www.landyzone.co.uk www.landyzone.co.uk

It’s off the defender thread and also worth a search on that forum, and more people might have had similar experiences
Click to expand...
Thanks Steve but I went through everything so many times it was impossible for me to be 180 out as I did rotate (just in case) I don't have problems with pumps as fuel shooting at least 4 feet from injector pipes and a good 1 foot spray from injectors....I have a problem but don't know what it is.....I have postponed working on it for the game being (for my sanity really) otherwise I can see me putting a match to it lol!
I've read so much from all sorts of different sources and can possible repeat verbatim every method to time a 12J or 2.5na or whatever it is. We will see whenever I decide to have another go at it....if ever

Cheers,
 
Hi all,

Well I couldn't resist having one last go.....
Checked everything....again!

Well eventually it started! I did have it on full throttle for a few seconds but when I reduced the throttle it wouldn't self sustain....it started again after a couple of seconds cranking but will only run on half to full throttle - as soon as reduced it stops!
And....its blowing out a lot of white smoke...a lot!!

So...I'm assuming that the white smoke is unburnt fuel? And therefore pump timing may be the issue? Everything else it new....injectors, head gasket, gloplugs, valves, valve seats.....

I checked the timing marks after a few runs and all are still lined up....three dots on 3 arrows.

Where should I go to first (apart from the scrappy's lol).

Cheers,

Steve
 
You must log in or register to reply here.

Similar threads

B
19j injector pump fuel timing question?
Replies
1
Views
385
miktdish
miktdish
R
200 tdi timing
Replies
11
Views
1K
lynall
L
alanm1
2.25 diesel wont time up
Replies
13
Views
1K
Bobsticle
Bobsticle
Lex Myster
Freelander 2 TD4 Timing Belt
Replies
4
Views
574
Stanleysteamer
Stanleysteamer
NeoX
Discovery 5 DTC on camshaft sensor - timing chain replacement?
2
Replies
26
Views
2K
Hippo
Hippo
Back
Top