Broke something Again

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
border

border

Well-Known Member
Posts
3,517
Location
North East. UK
Well here we go again, Im always breaking something, bit to impatient . They were all pretty hard to get out but thus one wouldn't budge, as you can see my various efforts to get it out have turned it in ti this :eek:
Any Ideas. ? its the Swivel Housing.
 

Attachments

  • IMG_20210505_193914.jpg
    IMG_20210505_193914.jpg
    233.7 KB · Views: 166
  • IMG_20210505_193845.jpg
    IMG_20210505_193845.jpg
    163.3 KB · Views: 180
Thanks Snapped two bloody cheap drill bits before, only got cordless . Is there some kind of hardened drill bits I can get ?
 
border said:
Well here we go again, Im always breaking something, bit to impatient . They were all pretty hard to get out but thus one wouldn't budge, as you can see my various efforts to get it out have turned it in ti this :eek:
Any Ideas. ? its the Swivel Housing.
Click to expand...
I have a spare in Jarrow will check it out are they handed as would need to know whether near or off side.
Edit the oil filler hole shows which side is which.
 
Blackburn said:
I have a spare in Jarrow will check it out are they handed as would need to know whether near or off side.
Edit the oil filler hole shows which side is which.
Click to expand...
Not sure if there sided Mate but I think this one is passenger side but will check tomorrow.
 
+1 for Cobalt HSS - BUT ( why the feck is there always a but :rolleyes: ), get the 8% Cobalt ones - AKA DIN339 - I buy all mine from :-

https://www.rennietool.co.uk/

Cheap as chips really for the quality, and next day delivery, either by A m A z O n prime, or direct from rennie :)

( no affilation blah blah blah :p )
 
Taking these off other axle, as I need the backplates. Might as well use the whole lot as look better condition. save me tapping that hole out. everything getting replaced with these. Full Kit With Swivel Housing (LATE) - Paddock Spares
Will try not not break anything when I stripping them down. :rolleyes:
 

Attachments

  • IMG_20210511_191624.jpg
    IMG_20210511_191624.jpg
    311.6 KB · Views: 90
  • IMG_20210511_191437.jpg
    IMG_20210511_191437.jpg
    293.2 KB · Views: 96
It must be nice having a good selection of parts available.
If your not going to use the 2.25 petrol engine your mate has in his shed would he be willing to sell to me would like a project to possibly replace my 200DI in the future. Mind I am coming up to 70 so may never get around to fitting it but would enjoy the tinkering.
 
Blackburn said:
It must be nice having a good selection of parts available.
If your not going to use the 2.25 petrol engine your mate has in his shed would he be willing to sell to me would like a project to possibly replace my 200DI in the future. Mind I am coming up to 70 so may never get around to fitting it but would enjoy the tinkering.
Click to expand...
Not sure which one to use yet, didn't get a chance to look at the 19 j yet, still thinking if making an offer on eBay one though but will let you know when I decide
 
You must log in or register to reply here.

Similar threads

tottot
Brake hose mystery
Replies
13
Views
466
tottot
tottot
Frisol
Series 2a - Vertical play in front wheels
Replies
10
Views
1K
Citizen Kane
C
A
Asking (again) for buying advice.
Replies
6
Views
1K
Fatrover
Fatrover
T
2,5 NA to 2,25 Petrol
Replies
15
Views
1K
ThomasLRNL
T
R
2000 Thor 4.6 fuel/starting problems
Replies
5
Views
466
richardtamps
R
Back
Top