brianp38dse
Well-Known Member
- Posts
- 20,065
- Location
- heathrow
Hi all Just a quick one before i order some are they ok or are they to be avoided at all costs, thanks.
P38A Britpart brake flexi
- Thread starter brianp38dse
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 33,600
- Location
- North Shropshire
Personally, i would think nobody would dare sell sub standard critical safety parts
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
Brit part would not risk selling sub standard brake parts. Possibly they will have a shorter life but I doubt it.
- Posts
- 2,101
- Location
- Mull of Kintyre
Hope they are ok cos I just ordered some. Was told I Cant get original as JLR are shut .
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
They should be OK as they don't have a bearing or move.
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
I used bp ones on my 110 but be aware that mine didn't come with the nuts, don't know how yours fix.?
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
I've had Britpart brake calipers on mine for 5 years now. No issues.
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
I also have Britpart front brake calipers,
brianp38dse
Well-Known Member
- Posts
- 20,065
- Location
- heathrow
Thanks every one it is what i though they must be ok so will be ordering a complete set, i was going to go for a braided set as they work out cheaper butt they dont come with all the brackets unlike the BP ones as i am going to the trouble of all new bolts and cleaning and painting, new brackets it is
Thanks again
Thanks again
tarphenry
Well-Known Member
- Posts
- 1,540
- Location
- bury lancs
why not new seals in your calipers ,about £3 each side I stuck mine in an electrolysis bath for 24 hrs, they came up like new and the pistons were unworn so I re sealed them
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
With a new caliper at about £25, personally I don't think it's worth messing about trying to renovate an old caliper. I like to be sure my brakes work.
tarphenry
Well-Known Member
- Posts
- 1,540
- Location
- bury lancs
Each to their own, i prefer to repair not replace where possible
- Posts
- 33,600
- Location
- North Shropshire
wish they were that cheap for my bike
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
He's after brake hoses not calipers.
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
Bike parts have always been a rip off.wish they were that cheap for my bike
I remember around 1979 getting my first car (Austin 1300 1972) and going to Halfords for service stuff and being shocked how cheap air, oil filters, sparkplugs and brakepads were compared to the RD250c I had at the time. Around 1/4 of the price. Shocked again when I needed 4 tyres (£24 remoulds £6 each fitted!) £27 for a rear tyre for the bike.
brianp38dse
Well-Known Member
- Posts
- 20,065
- Location
- heathrow
The calipers and discs were changed a few years ago and are still nice but might get a coat of paint just got to choose the colour
i have ordered pads front &rear slide pins f&r all new bolts for calipers and mounts and the six flexi pipes so work will commence as soon as they arrive.
i have ordered pads front &rear slide pins f&r all new bolts for calipers and mounts and the six flexi pipes so work will commence as soon as they arrive.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Sure I've got a set of new brake blocks on my bike in the garage,haven't been out on it since the farmer cut his blackthorn hedge,all the cuttings went on the cycle path. I got 11 punctures in the front tyre and 17 in the rear!! Walked half a mile back for the Classic, threw it in the back and its hung in the garage since.wish they were that cheap for my bike
- Posts
- 33,600
- Location
- North Shropshire
I meant motorcycleSure I've got a set of new brake blocks on my bike in the garage,haven't been out on it since the farmer cut his blackthorn hedge,all the cuttings went on the cycle path. I got 11 punctures in the front tyre and 17 in the rear!! Walked half a mile back for the Classic, threw it in the back and its hung in the garage since.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
- Posts
- 58,170
- Location
- Preston Lancs.
More than likely manufactured by the same company as the genuine Land rover ones you need a mortgage for.
