Bristol and West Land Rover Show 2013

redhand said:

BB has a SIP topnmg 150 that won't welderise anymore powers up but no out or wirefeed ?? apart frum it been fooked any idea's???

Click to expand...

fanatic said:

pcb fault most likely a relay or bad solder joint- possibly the thermal cut out as well if it has a glass fuse holder on front is it in tact?

Sip 150 wire issues fixed - MIG Welding Forum

Is this the one?- don't spose it has a wiring diagram?

Click to expand...

blue beasty said:

Yep I think so, internal layout is the same, figure its the control board as theres power out of the main on/off switch Might have a look to see how much they are to replace when I've got a few pennies

Click to expand...

fanatic said:

Most have gas on delay and then motor feed. Check the lance trigger wires back to machine- from the picture it looks like there is a power transistor to switch main contactor.

If you can get it to me, can look at it if you would like

Click to expand...

blue beasty said:

Having just seen control board prices I might well take you up on that offer! :jaw:

I'll give it a good check over and see if I can rule anything out

Cheers Fan

Click to expand...

fanatic said:

If the board has a part number it may be possible to find a wiring diagram.

While not familiar with your model, there are either internel or external overheat protection for transformer. If they fail you will get fan on and nothing more.

Do you have a basic digital multi meter?

Click to expand...

blue beasty said:

Yep.....well....Pikey has I'll pull it out from under the pile an investigate tomorrow

Click to expand...

accywingy said:

Freddy 007...... B&W (maybe Eastnor)
BB ............Both, B&W/Eastnor
robint.............. B&W
redhand & minty .............BOTH
fanatic
Bump
200tdi ayre
ratty................B&W
Tarantula
BotswanaGuy
accy Both work depending
Sirus
110woman
Deasy.... B&W
Mandy B&W

Click to expand...

Freddy 007 said:

There is a pretty spreadsheet fur signing up to man/woman the club stand
Land Rover Show, Bath & West / Eastnor

Click to expand...

blue beasty said:

We's a bit thin on the ground fer Eastnor :suspicious:

Click to expand...

Freddy 007 said:

Maybe it don't help this thread being called
'Bristol and West Land Rover Show 2013'

Click to expand...

blue beasty said:

We's a bit thin on the ground fer Eastnor :suspicious:

Click to expand...

blue beasty said:

What fookin eejit called it that then?

Click to expand...

chunkymunky said:

I'll probably be there. Just can't remember exactly when I have an event.

Click to expand...

blue beasty said:

Seeing as tis in yer backyard you bastid better be

Click to expand...

Mandy said:

I think I'll be able to come along so long as I can get there via public transport (if such a thing still exists in the west )

Click to expand...

ratty said:

Nearest train station is castle Carey which is about 15 mins drive from the bath and west show ground.

Click to expand...