Brake pedal hiss

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

AJofShabby

Member
Posts
78
Location
UK
Hi all
1987 110. Brakes are poor. Bled and rebled. New front callipers and pads. New rear pads and brake cylinders. When brake pedal pressed there is a hiss and pedal travels almost to the floor. Is it the M cyl, brake servo? Any ideas pls. Thanks.
 
Get the missus or a friend to stand with their head under the bonnet to listen for the hiss whilst you operate the brake. That might narrow it down a bit. I once had a leaky servo diaphragm that used to hiss, the pedal went down a bit further but not to the floor.

Col
 
Afternoon all. Swapped out the brake vacuum servo and vacuum pipe. All now sorted. The back of the servo was in poor shape and, when shaken, there is a nut or similar rolling around inside. Thanks for your help.
 
Afternoon all. Swapped out the brake vacuum servo and vacuum pipe. All now sorted. The back of the servo was in poor shape and, when shaken, there is a nut or similar rolling around inside. Thanks for your help.
that cant have been the full answer,servo rod cant have been acting against the master
 
Back
Top