gazmc1973
New Member
- Posts
- 20
- Location
- Humshaugh Hexham Northumberland
Ive had 3 disco 1s all had same prob all been servo take it off and examine it like i said mine hissed but not from under bonnet but where brake pedal connects
Brake pedal goes straight to the floor
- Thread starter Andytats
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
either shot master cylinder seals (issue before you changed it)
now air in system. clamping pipes as suggested may help, but depends on where air is.
is it an abs model? they can be tw@ts to get air out of pump.
is it a blue box master cylinder? new ones can be defective. check for fluid being pushed back into resovoir when the pedal is pressed.
now air in system. clamping pipes as suggested may help, but depends on where air is.
is it an abs model? they can be tw@ts to get air out of pump.
is it a blue box master cylinder? new ones can be defective. check for fluid being pushed back into resovoir when the pedal is pressed.
