Brake Pads

NIAB · May 10, 2008

Just a request for any pitfalls in changing pads on freelander 2000. I'm not adverse to changing pads but this will be the first time on freelander, so if there is anything i should be looking out for then i would appreciate the heads up. Thanks.

Dutch RR · May 10, 2008

You should have no problems on this one, just remember the torque on your wheel nuts is 110 nm

Cheers Dutch RR

G13SJC · May 10, 2008

Also bear in mind you will need the early type pad as they changed in late 2000 to a different pad.

The early pads are identical in shape to Rover 200, 400 and 800 models if this helps identify the correct ones.

Make sure tou have some copaslip for the backs of the pads, and give the carriers a good clean to remove all dirt and dust to enable the pads to slide against the disc freely.

Regards,

Steve

NIAB · May 11, 2008

Thanks guys,
I gave lr centre the vin number so they should have sent the correct type.

Brake Pads

NIAB

New Member

Dutch RR

New Member

G13SJC

New Member

NIAB

New Member

Similar threads