Brake overhaul time.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
mikegsxr

mikegsxr

Active Member
Posts
263
Location
Romsey
Morning all,
Finally getting around to a major overhaul of the 110s brakes. New discs, caliper strip, paint, new SS pistons etc. Mine has ABS and I'm not sure how the hub is split from the disc as the pulsar ring covers up the bolts, see pic below. Trying to make sure I have all the bits I need before it's off the road.
Has anyone been here before me and done the job?
Cheers,
Mike.
20190707_133409.jpg
 
Does the ABS ring not unbolt from the other side.

Rest of job fairly simple to take apart and refit.

Re Calliper overhaul, that goes ok providing the caliper isn't too rusty and pitted. Stainless Steel Piston are a good idea, did them on my 90 couple of years ago.

Hope you purchased good quality delphi or Ap lockheed seal kits as cheap ones don't last or even fit

Good luck
 
mikegsxr said:
Morning all,
Finally getting around to a major overhaul of the 110s brakes. New discs, caliper strip, paint, new SS pistons etc. Mine has ABS and I'm not sure how the hub is split from the disc as the pulsar ring covers up the bolts, see pic below. Trying to make sure I have all the bits I need before it's off the road.
Has anyone been here before me and done the job?
Cheers,
Mike. View attachment 233087
Click to expand...
Your stub axle looks a bit ropey.
 
You must log in or register to reply here.

Similar threads

dag019
Brake caliper rebuild
Replies
3
Views
819
Seaswood
Seaswood
DefendingLancashire
300TDI Four-parter: brake wear, lift pump / fuel filter, turbo, and bushes / squeaking
Replies
13
Views
477
miktdish
miktdish
D
FTC3846 (300TDi solid rear brake disc) – different dimensions between suppliers
Replies
7
Views
2K
djpeanut
D
K
Disco 2 Nanocomm does not bleed after 0.5L or more of brake fluid was lost in braking system
Replies
2
Views
571
Kaijun
K
P
Discovery 2 brake issues after replacment
Replies
4
Views
708
psk100
P
Back
Top