Disco 2 Brake bleeding woes
- Thread starter Tim C
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
sierrafery
Well-Known Member
- Posts
- 17,871
- Location
- Arad/Romania
The SVS mod would not affect the braking whatsoever, it will only inhibit the active braking modes
- Posts
- 44,833
- Location
- East Dorset
@sierrafery Would you mind explaining what "inhibit the active braking modes" means.
As, earlier this year, I did the SVS mod as I thought I had been told it was a good thing to do even with a new switch panel on the bottom of the unit.
I have to say that I just did it, all three amigos went off and stayed off and I have not had them come back on again, but I have not tested ABS or TC or HDC as I thought I had understood that none of these would be affected by the mod.
sierrafery
Well-Known Member
- Posts
- 17,871
- Location
- Arad/Romania
Means that if you have a SVS(shuttle valve switch) related fault and the 3 amigos are on because of that the system goes to a default where active braking modes(ABS, TC, HDC, EBD) are affected, i didnt mean that active braking modes are badly affected by the mod i meant that the SVS failure will do that but i wasnt clear enough... see attachment for "Shuttle valve switch failure"... don't worry, you did well with the wiring mod as i explained here: Necessity of the mod = SVS fix(wiring mod option B) "graphic" explanation
- Posts
- 44,833
- Location
- East Dorset
Cheers mate!
I'll wrap a wet towel around my head later on and try to get my brain around all this.
But the main thing is that you are telling me that all should function as normal, which is what I was hoping to hear.
